LECROY Repair Services India
Teledyne LeCroy is a world-leading manufacturer of digital oscilloscopes, protocol analyzers, and waveform measurement instruments headquartered in the USA. Founded in 1964, LeCroy serves research labs, electronics manufacturers, and test engineers globally. In India, LeCroy equipment is extensively deployed across automotive, telecommunications, aerospace, and semiconductor testing facilities for signal integrity analysis and compliance verification.
Teledyne LeCroy is a world-leading manufacturer of digital oscilloscopes, protocol analyzers, and waveform measurement instruments headquartered in the USA. Founded in 1964, LeCroy serves research labs, electronics manufacturers, and test engineers globally. In India, LeCroy equipment is extensively deployed across automotive, telecommunications, aerospace, and semiconductor testing facilities for signal integrity analysis and compliance verification.
Synchronics Electronics has specialized expertise repairing LeCroy oscilloscopes, digitizers, and signal analyzers since 1994. We handle critical repair jobs for high-bandwidth instruments, display failures, probe interface issues, and measurement accuracy calibration problems. Indian electronics labs and OEMs trust Synchronics to restore LeCroy equipment to original factory specifications — minimizing downtime in R&D and manufacturing test environments across India.
180+ engineers certified in LeCroy oscilloscope repair and recalibration across India.
LECROY Equipment We Repair — By Category
LECROY Product Lines We Repair
Our engineers are trained on the full LECROY product range. Below are the major product families we service.
WaveRunner X-Series Oscilloscopes
High-performance digital oscilloscopes delivering 4-6 GHz bandwidth with deep memory and advanced triggering. Common faults include display LCD panel failures, vertical amplifier circuit degradation, and timebase accuracy drift affecting measurement precision.
SDA (Serial Data Analyzer) Protocol Analyzers
Multi-channel protocol and serial data analyzers for compliance testing of USB, LVDS, CAN, and PCI Express signals. Frequent issues include probe contact failure, measurement module malfunction, and firmware corruption affecting signal decode accuracy.
HDO (High Definition Oscilloscope) Series
12-bit resolution oscilloscopes engineered for precision measurements in automotive and industrial applications. Common repair needs involve vertical resolution loss, channel calibration errors, and graticule rendering problems on display interfaces.
MDA800 Modular Digitizer Series
Modular high-speed digitizer platforms with up to 12-bit resolution and 5 GSa/s sampling for aerospace and defense test applications. Typical failures include ADC (analog-to-digital converter) module failures, clock signal integrity issues, and memory array faults.
CP Series Current Probes and Accessories
Active and passive current probes with integrated signal conditioning for LeCroy oscilloscopes. Common problems include probe DC offset drift, preamplifier circuit failure, and connector port intermittency affecting measurement reliability.
Wavemaster Portable Oscilloscopes
Portable, battery-powered digital oscilloscopes optimized for field service and on-site troubleshooting in manufacturing plants. Frequent issues include battery charging circuit failure, touch-screen responsiveness degradation, and signal conditioning module faults.
Why Choose Synchronics for LECROY Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on LECROY equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common LECROY Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in LECROY equipment arriving at our workshop.
- ✓Vertical amplifier channel loss or reduced sensitivity — LeCroy vertical amplifier circuits degrade from thermal cycling or component aging, causing input impedance mismatches and reduced gain accuracy. This directly impacts measurement voltage range and signal-to-noise ratio.
- ✓Display LCD panel goes dark or shows pixel corruption — LeCroy oscilloscope LCD displays fail due to backlight driver circuit degradation, timing signal loss, or physical panel defects from vibration and thermal stress in industrial test environments.
- ✓Timebase accuracy drift — waveform timing measurements unreliable — LeCroy internal reference oscillator ages or picks up external RF interference, causing clock frequency to drift. This causes time-per-division readings and frequency measurements to become inaccurate, critical for compliance testing.
- ✓Probe interface intermittency — unstable waveform capture — LeCroy probe connectors and receptacles develop oxidation, mechanical looseness, or solder joint fatigue, leading to inconsistent signal coupling and measurement dropouts that are difficult to diagnose in production testing.
- ✓Memory module failure — cannot capture full waveform record length — LeCroy deep memory acquisition boards use specialized high-speed SDRAM that can fail due to voltage transients, thermal cycling, or manufacturing defects, preventing extended waveform capture.
- ✓Firmware corruption — oscilloscope fails to boot or resets unexpectedly — Power interruption during firmware updates, corrupted flash memory, or bootloader sector damage can render LeCroy instruments non-functional and unable to load measurement software.
How We Repair Your LECROY Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using LECROY Equipment
We serve plant maintenance teams across all major industries where LECROY automation is deployed.
Frequently Asked Questions — LECROY Repairs
Do you repair LeCroy equipment anywhere in India?+
Yes. Synchronics repairs the complete LeCroy oscilloscope, analyzer, and digitizer product range. We offer PAN-India door-step pickup from Mumbai, Delhi, Pune, Chennai, Hyderabad, Ahmedabad, Bangalore, and all other major cities. Equipment is repaired in our 18,000 sq-ft facility in Vadodara, Gujarat, with full turnaround in 5-7 working days for standard repairs.
How do you handle LeCroy oscilloscope recalibration after repair?+
All LeCroy repairs at Synchronics include complete metrological recalibration against NIST-traceable standards. We verify vertical amplitude accuracy (±2% of full scale), timebase frequency stability (±50 ppm), and probe attenuation ratio calibration. Full calibration certificates are provided with your repaired instrument.
Can Synchronics repair LeCroy high-bandwidth (>4 GHz) oscilloscopes?+
Yes. Our senior engineers have deep expertise with WaveRunner X-Series and HDO high-bandwidth instruments. We repair vertical amplifier stages, calibrate input attenuators, and verify bandwidth performance up to 6 GHz using precision test signals. We maintain OEM documentation and component sourcing for all LeCroy models.
What is the typical cost of repairing a LeCroy oscilloscope display or LCD issue?+
LeCroy display repairs typically cost INR 8,000 - 25,000 depending on whether the issue is the backlight inverter, LCD controller board, or physical panel replacement. We provide a free diagnostic report with repair quote. Most display repairs are completed within 3-4 days.
Do you stock spare parts for LeCroy oscilloscopes?+
Synchronics maintains a dedicated parts inventory for LeCroy including LCD panels, probe connectors, memory modules, and vertical amplifier boards. For rare components, we source direct from Teledyne LeCroy distributors within 48-72 hours. We never use counterfeit or refurbished components — only genuine OEM parts.
How do I send my LECROY unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a LECROY drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on LECROY repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your LECROY unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
LECROY Repair Catalog
Showing 1–1 of 1 LECROY products
Other Brands We Repair in the Same Categories
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service