MAGNET-PHYSIK Repair Services India
MAGNET-PHYSIK, founded in Germany in 1960, specializes in advanced magnetic measurement, defectoscopy, and non-destructive testing (NDT) equipment. Renowned globally for eddy current instruments, magnetic particle inspection systems, and ultrasonic flaw detection devices, MAGNET-PHYSIK serves automotive, aerospace, heavy engineering, and metal fabrication sectors. Their precision instruments are critical in Indian manufacturing for quality assurance and material integrity validation across tier-1 automotive suppliers and defense contractors.
MAGNET-PHYSIK, founded in Germany in 1960, specializes in advanced magnetic measurement, defectoscopy, and non-destructive testing (NDT) equipment. Renowned globally for eddy current instruments, magnetic particle inspection systems, and ultrasonic flaw detection devices, MAGNET-PHYSIK serves automotive, aerospace, heavy engineering, and metal fabrication sectors. Their precision instruments are critical in Indian manufacturing for quality assurance and material integrity validation across tier-1 automotive suppliers and defense contractors.
Synchronics Electronics repairs MAGNET-PHYSIK defectoscopy and NDT instruments including eddy current flaw detectors, magnetic particle inspection controllers, and ultrasonic testing units. Our 180+ engineers have repaired MAGNET-PHYSIK systems in automotive assembly lines, casting foundries, and forging plants across India. We handle circuit board failures, sensor calibration issues, display malfunctions, and firmware updates — restoring equipment to OEM specifications within 5-7 working days.
Expert repair of MAGNET-PHYSIK eddy current, magnetic particle, and ultrasonic NDT systems.
MAGNET-PHYSIK Equipment We Repair — By Category
MAGNET-PHYSIK Product Lines We Repair
Our engineers are trained on the full MAGNET-PHYSIK product range. Below are the major product families we service.
Ferromaster Series Eddy Current Instruments
Ferromaster portable and bench-top eddy current flaw detectors for surface and subsurface crack detection in ferrous and non-ferrous metals. Common failures include probe impedance drift, oscillator circuit instability, and LCD display decay affecting measurement accuracy.
DEFECTOMAT Magnetic Particle Inspection Controllers
Automated magnetic particle inspection systems for detecting surface discontinuities in castings, forgings, and welded components. Typical repair issues: magnetizing circuit failures, indicator lamp burnout, relay contact corrosion, and sensor signal loss.
Multitest Family Ultrasonic Flaw Detectors
Digital ultrasonic testing equipment for thickness measurement and internal flaw detection in metals and composites. Common faults: transducer coupling loss, A-scan display resolution issues, DAC (distance-amplitude correction) curve errors, and storage memory corruption.
ISOCAM Thermal / Optical Inspection Systems
Infrared and optical defect detection instruments for hot rolling mills and continuous casting operations. Failures typically involve sensor thermal drift, image processor board faults, and communication port errors.
Laboscope Surface Analysis Systems
Bench-top microscopy and surface roughness measurement systems for precision component quality control. Repair focus: stage motor failures, optical lens degradation, measurement software crashes, and USB interface faults.
CIRCOMETER Coil and Resonance Measurement Units
Precision instruments for measuring coil impedance, resonance frequency, and Q-factor in electromagnetic testing probes. Issues include frequency reference drift, capacitor aging in tuning circuits, and LCD segment failure.
Why Choose Synchronics for MAGNET-PHYSIK Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on MAGNET-PHYSIK equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common MAGNET-PHYSIK Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in MAGNET-PHYSIK equipment arriving at our workshop.
- ✓Eddy current probe impedance drift and calibration loss — MAGNET-PHYSIK probes experience impedance drift due to temperature fluctuations, humidity exposure, or aging of coil wire insulation in foundry and automotive shop-floor environments. Repeated thermal cycling in Indian manufacturing plants degrades probe-to-instrument coupling.
- ✓Magnetic particle magnetizing circuit relay failures — High-current relay contacts in DEFECTOMAT systems corrode or weld shut due to voltage spikes from magnetizing coil discharge, load arcing, or poor power conditioning common in Indian steel mills and foundries with unstable grid supply.
- ✓LCD display segment fading and pixel loss on defect indicators — MAGNET-PHYSIK portable and bench flaw detectors display segments fade from prolonged use, high ambient temperatures (common in hot-rolling and foundry floors), or marginal contrast voltage regulation causing incomplete segment illumination and misreading of flaw signals.
- ✓Ultrasonic transducer coupling loss and dead zones — Transducer faces degrade from mechanical wear, corrosion of acoustic coupling surfaces, or deterioration of matching layers used in Multitest systems. Industrial environments with coolant mist, salt spray, and vibration accelerate degradation affecting signal penetration.
- ✓DAC curve memory loss and gain calibration errors — MAGNET-PHYSIK ultrasonic instruments lose stored DAC (distance-amplitude correction) curves when EEPROM or flash memory cells fail, typically after 8-10 years in humid foundry or marine environments where electrolytic corrosion affects circuit board traces.
- ✓Communication port and USB interface timeouts — MAGNET-PHYSIK systems report COM port errors or USB disconnects when port drivers corrupt, crystal oscillator frequency drifts, or galvanic isolation circuits fail from thermal stress and power surges common in Indian industrial electrical infrastructure.
How We Repair Your MAGNET-PHYSIK Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using MAGNET-PHYSIK Equipment
We serve plant maintenance teams across all major industries where MAGNET-PHYSIK automation is deployed.
Frequently Asked Questions — MAGNET-PHYSIK Repairs
Do you repair MAGNET-PHYSIK equipment anywhere in India?+
Yes. Synchronics repairs the full MAGNET-PHYSIK product range — eddy current defectoscopes, magnetic particle inspection systems, ultrasonic flaw detectors, thermal scanners, and coil analysis instruments. We offer PAN India door pickup from Mumbai, Delhi, Pune, Bangalore, Chennai, Hyderabad, Ahmedabad, Kolkata, and 50+ other cities. All repairs completed at our main facility in Vadodara, Gujarat with same-day diagnostics and 5-7 day turnaround.
How do you handle MAGNET-PHYSIK probe recalibration and certification?+
Synchronics recalibrates MAGNET-PHYSIK eddy current and ultrasonic probes using precision impedance meters and resonance analyzers. We reissue ISO 9001 / IEC 61326 calibration certificates valid for 12 months post-repair. Impedance values, resonance frequencies, and Q-factors are documented and compared against MAGNET-PHYSIK OEM baseline specifications. Reference blocks and standard samples are used for ultrasonic verification.
What is the average repair cost for a MAGNET-PHYSIK eddy current instrument?+
MAGNET-PHYSIK eddy current defectoscope repairs typically cost INR 18,000 to INR 45,000 depending on fault severity. Probe replacement costs INR 12,000-25,000. LCD display and oscillator circuit failures run INR 8,000-18,000. We provide free diagnostics and quote before starting work. Most repairs qualify for 6-month warranty on replaced components.
Can you repair MAGNET-PHYSIK systems with firmware or software corruption?+
Yes. Synchronics can recover, backup, and reprogram MAGNET-PHYSIK embedded firmware and calibration data using OEM-licensed programming tools. We maintain a secure database of factory-default firmware images for all MAGNET-PHYSIK model series. If original calibration data is lost, we restore settings from the equipment serial number and recalibrate using reference standards. Software glitches and menu navigation freezes are debugged and patched.
Do you supply genuine MAGNET-PHYSIK replacement parts and spare modules?+
Synchronics stocks genuine MAGNET-PHYSIK relay modules, transducers, LCD displays, oscillator crystals, probe cables, and connector assemblies. For obsolete or long-lead parts, we source from authorized German distributors within 10-15 days. We do not use counterfeit or sub-grade components. All parts carry OEM serial traceability and 12-month warranty.
How do I send my MAGNET-PHYSIK unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a MAGNET-PHYSIK drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on MAGNET-PHYSIK repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your MAGNET-PHYSIK unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
MAGNET-PHYSIK Repair Catalog
Showing 1–1 of 1 MAGNET-PHYSIK products
Other Brands We Repair in the Same Categories
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service