Laboratory Instrument Repair
PCB-Level Repair for HPLC, GC, Spectrophotometers & Mass Spectrometers — Serving Pharma, Food & R&D Labs Across India
India's most trusted Laboratory Instrument Repair Lab — serving 5,000+ pharma, food & research facilities
For over 32 years, Synchronics has been the trusted partner for laboratory instrument repair across India's key pharma and research clusters. From Gujarat's pharmaceutical heartland — Ankleshwar GIDC, Vadodara, and Ahmedabad — to Maharashtra's industrial corridors in Mumbai, Pune, and Aurangabad, and extending to Hyderabad's pharma city and Bangalore's R&D corridors, our engineers bring component-level expertise directly to your lab's supply chain. We repair HPLC pump modules, UV-Vis detector boards, GC column oven control electronics, mass spectrometer ion source power supplies, and the full spectrum of analytical instrument PCBs — restoring instruments to OEM performance at a fraction of replacement cost.
Diagnosis Guide
Common Laboratory Instrument Problems We Fix
Experiencing any of these symptoms? Our engineers have diagnosed and repaired thousands of these faults.
HPLC Pump Not Building Pressure
System pressure reads zero or below setpoint, flow rate unstable, pump head leaking
Pump drive board failure, solenoid valve fault, check valve damage, motor driver PCB failure
UV-Vis Baseline Drift / Lamp Failure
Noisy or drifting baseline, no lamp ignition, detector saturation alarm
Deuterium lamp end-of-life, lamp power supply PCB failure, detector board noise, loose fibre optic coupling
GC Detector Signal Loss
FID or TCD shows no signal, flat baseline, detector response below threshold
Detector amplifier board fault, igniter circuit failure, temperature controller PCB error, corrupted detector firmware
System Board Error Codes Not Clearing
Instrument locked in error state after power cycle, persistent alarm on display, communication loss to PC software
Control board memory corruption, power supply rail out of spec, firmware fault, failed communication interface IC
How It Works
Our Laboratory Instrument Repair Process
A systematic, schematic-driven repair process — from receipt to dispatch.
Receive & Diagnose
Instrument is logged in our ERP system, photographed, and subjected to a systematic power-up and functional diagnosis — fault codes recorded, board voltages measured against reference.
Component-Level PCB Repair
Failed components identified from diagnosis are replaced at board level — ICs, capacitors, voltage regulators, MOSFETs, and connectors — using genuine or equivalent-spec parts.
Functional Validation
Repaired instrument subjected to functional testing — pump pressure test, detector signal verification, temperature control stability, and communication interface checks.
Quality Sign-off & Dispatch
Final QA inspection, detailed repair report generated with before/after test data. 6-month warranty certificate issued. Instrument professionally packed and dispatched within 24 hours.
The Synchronics Advantage
Why Choose Us for Laboratory Instrument Repair
No Fix No Charge
If we cannot repair your instrument, you pay nothing. Our diagnosis is always transparent — we provide a detailed fault report before you commit to repair.
OEM-Grade Components
We source genuine manufacturer components and approved equivalents from our 2M+ component inventory, ensuring long-term reliability of every repair.
NABL-Lab Compatible Documentation
Every repair comes with a comprehensive service record including fault description, components replaced, and functional test results — suitable for NABL-accredited lab audit requirements.
Dedicated Lab Instrument Tech Team
A specialist team of engineers with deep experience in analytical instrument electronics — not generalist technicians, but experts who understand lab instrument architectures.
Industries Served
Where Laboratory Instruments Are Used
Pharmaceutical QC / R&D Labs
HPLC, GC, UV-Vis, dissolution testers, Karl Fischer titrators
Food & Beverage Testing
GC for residue analysis, spectrophotometers, moisture analysers
Environmental Testing Labs
ICP-OES, GC-MS, TOC analysers, water quality instruments
Hospital & Diagnostic Labs
Clinical analysers, spectrophotometers, centrifuge electronics
Academic & Research Institutes
Mass spectrometers, NMR ancillary electronics, FTIR systems
Chemical & Petrochemical R&D
GC process analysers, viscometers, rheometer control boards
Trusted Brands
Brands We Service
Component-level repair for all major manufacturers
FAQ
Frequently Asked Questions
Yes — we repair HPLC systems from all major manufacturers including Waters, Shimadzu, Agilent, PerkinElmer, and Thermo Fisher. Our team has board-level expertise across pump modules, detector electronics, autosampler control boards, and column oven controllers from all these platforms.
Yes. Every repair comes with a detailed service record that includes the fault description, root cause analysis, list of components replaced, and functional test results. This documentation is structured to support pharma GMP audit trails and is compatible with NABL-accredited lab record-keeping requirements.
We regularly repair HPLC pump drive boards, high-pressure pump motor controllers, UV and DAD detector boards, lamp power supply assemblies, autosampler servo control PCBs, column oven temperature controller boards, and system communication interface cards — all at the component level.
Yes. This is one of our key strengths. Many legacy instruments — such as older Waters 600 series, Shimadzu LC-10A/VP series, or early Agilent 1100 modules — are no longer supported by the OEM but can be repaired and returned to full working order by our team. We maintain a library of schematics and component cross-references for discontinued models.
Contact us first to log your instrument and receive a job reference number. We recommend packing the instrument securely in its original packaging or equivalent foam-lined transit case. For fragile instruments, our logistics team can arrange insured pickup from your location anywhere in India. Our facility is located in Vadodara, Gujarat.
Laboratory Instrument Repair Service — Gujarat, Maharashtra & Pan India
Synchronics serves laboratory instrument repair needs across India's most active pharmaceutical and research clusters. In Gujarat, we support labs in Ankleshwar GIDC — home to over 60 bulk drug manufacturers — as well as Vadodara and Ahmedabad. In Maharashtra, our logistics network reaches Aurangabad's pharma belt, Pune's Hinjewadi IT and biotech corridor, and Mumbai's diagnostics sector. Further afield, we serve Hyderabad's Genome Valley pharma hub, Baddi in Himachal Pradesh, and Bangalore's Electronic City and Whitefield R&D zones.
NABL-accredited laboratories and pharma QC departments have specific needs when it comes to instrument repair — not just a working instrument, but documented evidence of what was repaired and how performance was restored. Synchronics provides that documentation as standard, making us the preferred repair partner for labs that operate under GMP, ISO/IEC 17025, or internal quality systems. Whether your HPLC has gone down during a stability study, your GC is showing erratic detector signals before an FSSAI submission, or your UV-Vis spectrophotometer needs a power supply board replaced, our team can help.
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service