ACUREX Repair Services India
ACUREX, founded in 1978, specializes in advanced temperature measurement, control systems, and process instrumentation for critical industrial applications. With global recognition in thermal management and data acquisition, ACUREX equipment powers manufacturing, semiconductor, pharmaceutical, and research facilities worldwide. In India, ACUREX instruments are widely deployed across automotive, aerospace, chemical processing, and electronics manufacturing sectors where precision thermal control is non-negotiable.
ACUREX, founded in 1978, specializes in advanced temperature measurement, control systems, and process instrumentation for critical industrial applications. With global recognition in thermal management and data acquisition, ACUREX equipment powers manufacturing, semiconductor, pharmaceutical, and research facilities worldwide. In India, ACUREX instruments are widely deployed across automotive, aerospace, chemical processing, and electronics manufacturing sectors where precision thermal control is non-negotiable.
Synchronics Electronics has built deep expertise repairing ACUREX temperature controllers, pyrometers, data loggers, and process instrumentation across 180+ field installations. Our engineers understand ACUREX firmware, calibration procedures, sensor interfacing, and communication protocols. We handle thermocouple amplifiers, infrared measurement modules, and multi-point monitoring systems. When your ACUREX equipment fails, Synchronics provides rapid turnaround diagnostics, component-level repairs, and full functional testing to restore production control and measurement accuracy.
Expert ACUREX repair for temperature controllers, pyrometers, and industrial instrumentation across India.
ACUREX Product Lines We Repair
Our engineers are trained on the full ACUREX product range. Below are the major product families we service.
ACUREX Thermocouple Transducers and Amplifiers
Precision thermocouple signal conditioning and amplification modules used in furnace control, extrusion, and heat treatment. Common failures include amplifier IC degradation, cold-junction compensation drift, and connector oxidation affecting signal accuracy.
ACUREX Infrared Pyrometers (Fixed and Portable)
Non-contact temperature measurement systems for high-temperature process monitoring in foundries, glass manufacturing, and metal processing. Typical repairs involve lens cleaning, detector replacement, linearization errors, and analog output scaling calibration.
ACUREX Data Acquisition and Logging Systems
Multi-channel data acquisition platforms and temperature loggers for process documentation, compliance, and SPC monitoring. Common issues include memory corruption, USB interface failure, real-time clock drift, and sensor channel dropout.
ACUREX Temperature Controllers and Regulators
Proportional-integral-derivative (PID) controllers for furnace, oven, and thermal bath applications. Failures include relay burn-out, thermostat calibration loss, display board failure, and communication bus errors in networked models.
ACUREX RTD and Resistance Thermometer Modules
Precision resistance temperature detector (RTD) signal conditioners and transmitters for plant-wide temperature monitoring networks. Repair challenges include bridge circuit imbalance, transmitter zero/span drift, and 4-20mA loop failures.
ACUREX Process Control Interfaces and HMIs
Touchscreen and legacy interfaces for ACUREX process control systems. Common defects involve LCD backlight failure, encoder damage, firmware corruption, and Ethernet/Modbus communication errors in distributed systems.
Why Choose Synchronics for ACUREX Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on ACUREX equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common ACUREX Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in ACUREX equipment arriving at our workshop.
- ✓ACUREX Thermocouple Amplifier Output Drift or Noise — Thermocouple ice-junction compensation circuit aging, internal electrolytic capacitor leakage, or connector pin corrosion preventing accurate cold-junction voltage reference. This is common in ACUREX 1103/1104 units in humid or high-vibration environments.
- ✓ACUREX Pyrometer No Reading or Erratic Temperature Display — Infrared detector contamination (dust, condensation, or protective window cloudiness), thermopile element aging, or loss of reference temperature compensation in the pyrometer optics. Common in foundry and glass-making environments with particulate emissions.
- ✓ACUREX Data Logger Memory Full or File Corruption — Exceeded data logging capacity, improper shutdown during active recording, or EEPROM bit-flip from electrical noise or low battery during operation. ACUREX DataQUIET and TempLog systems are prone to this in unshielded cabinet environments.
- ✓ACUREX Temperature Controller Setpoint Loss or Display Blank — Backup battery failure in CMOS memory, display LCD degradation, or corrupted PID calibration table due to power surge. ACUREX TC-2100 and TC-3200 models frequently experience this in plants with unstable three-phase power.
- ✓ACUREX RTD Transmitter 4-20mA Loop Error or No Signal — Transmitter electronics power supply failure, RTD sensor open circuit or poor connection, bridge circuit zero-point drift, or loop isolation/current-limiting resistor failure in the connected control circuit.
- ✓ACUREX Process Control Network Communication Failure (Modbus/Ethernet) — Corrupted firmware in networked gateway or HMI module, failed Ethernet port, damaged Modbus termination resistor, or IP address conflict in multi-unit installations. Common after lightning strikes or unplanned power shutdowns.
How We Repair Your ACUREX Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using ACUREX Equipment
We serve plant maintenance teams across all major industries where ACUREX automation is deployed.
Frequently Asked Questions — ACUREX Repairs
Do you repair ACUREX equipment anywhere in India?+
Yes, Synchronics repairs the full ACUREX product range — thermocouple amplifiers, pyrometers, data loggers, temperature controllers, RTD transmitters, and networked process interfaces. We offer PAN-India pickup from Mumbai, Delhi, Pune, Chennai, Hyderabad, Ahmedabad, Bangalore, and all other major cities. All repairs are completed in our Vadodara, Gujarat facility.
What is the typical turnaround time for ACUREX pyrometer or controller repair?+
Most ACUREX diagnostics and repairs complete within 5-7 working days. Express service is available for critical production equipment — our Vadodara facility can prioritize urgent units. We provide daily repair status updates and arrange same-day return shipment if needed. Lead times may extend for specialty component procurement or firmware restoration from archive backups.
Can Synchronics recalibrate ACUREX thermocouples and RTD instruments to traceable standards?+
Yes. Synchronics calibrates all ACUREX temperature measurement instruments against traceable NIST reference standards and black-body cavity sources. We provide detailed calibration certificates documenting offset, linearity, and repeatability across the full measurement range. For thermocouple amplifiers and RTD transmitters, we verify both cold-junction compensation and transmitter output scaling. All calibration reports reference ACUREX specifications and ISO 9001 quality protocols.
Do you stock ACUREX spare parts and components?+
Synchronics maintains inventory of common ACUREX spare parts including display modules, power supply cards, thermocouple connectors, and sensor cables. For specialized components such as infrared detectors, thermopile elements, or custom PCB boards, we source directly from ACUREX distributors or perform component-level repairs. Rush delivery is arranged for plants requiring same-week spares. Contact our sales team to confirm part availability and delivery timelines.
What happens if my ACUREX equipment is obsolete or out-of-production?+
Synchronics specializes in legacy ACUREX equipment repair. We archive historical schematics, firmware images, and calibration data for discontinued models including older TC-2100, Pyrofiber 1000, and LPI-800 systems. If original components are unavailable, we perform reverse-engineering repairs, substitute compatible components, and validate functionality. Many Indian plants still operate decades-old ACUREX systems — we keep them running cost-effectively.
How do I send my ACUREX unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a ACUREX drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on ACUREX repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your ACUREX unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
ACUREX Repair Catalog
No products found for ACUREX
Don't See Your ACUREX Model Listed?
We repair the full range of ACUREX industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.
Free evaluation • 6-month warranty • PAN India pickup
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service