ARTOS Repair Services India
ARTOS Engineering is a German-headquartered specialist in precision automation, motion control, and rotary indexing systems for high-speed assembly and manufacturing applications. Founded in 1971, ARTOS serves global automotive, pharmaceutical, packaging, and electronics industries with cam-operated and servo-driven indexers, feeders, and assembly modules. Strong presence across Indian automotive and pharma manufacturing sectors.
ARTOS Engineering is a German-headquartered specialist in precision automation, motion control, and rotary indexing systems for high-speed assembly and manufacturing applications. Founded in 1971, ARTOS serves global automotive, pharmaceutical, packaging, and electronics industries with cam-operated and servo-driven indexers, feeders, and assembly modules. Strong presence across Indian automotive and pharma manufacturing sectors.
Synchronics repairs the full spectrum of ARTOS industrial automation equipment including rotary indexers, cam-operated systems, servo control modules, and integrated assembly solutions. Our 180+ engineers have extensive experience diagnosing ARTOS motion control faults, calibration drift, and complex synchronisation issues across all product generations. We restore ARTOS indexers to zero-backlash precision and guaranteed cycle repeatability.
Master technicians certified in ARTOS precision indexing and servo motion control restoration.
ARTOS Product Lines We Repair
Our engineers are trained on the full ARTOS product range. Below are the major product families we service.
ARTOS Rotary Indexers
Cam-operated and servo-driven indexing tables for high-speed assembly. Common faults include indexing position drift, backlash increase, dwell inconsistency, and mechanical wear on cam followers and roller bearings.
ARTOS Feeder Systems
Vibratory and servo linear feeders for component presentation. Typical repair issues: loss of feed consistency, amplitude degradation, servo position lag, and coil demagnetisation in vibratory feeders.
ARTOS Assembly Modules
Integrated pick-and-place, insertion, and assembly workheads with embedded servo drives and pneumatic control. Common issues: servo jitter, pneumatic valve wear, position sensor drift, and timing misalignment.
ARTOS Control Electronics
Dedicated motion controllers, servo amplifiers, and HMI interfaces for ARTOS systems. Repair challenges: capacitor failure, relay chattering, communication loss, and firmware corruption.
ARTOS Mechanical Subassemblies
Precision gearboxes, cam mechanisms, roller bearings, and dwell plates. Wear and service issues: bearing preload loss, cam profile wear, gear backlash increase, and seal degradation.
Why Choose Synchronics for ARTOS Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on ARTOS equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common ARTOS Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in ARTOS equipment arriving at our workshop.
- ✓Indexer position drift beyond tolerance — ARTOS cam followers or roller bearings wear under high-speed cyclic load, increasing backlash and reducing indexing accuracy. Hydraulic or servo feedback sensor misalignment also causes creep.
- ✓Servo indexer lag or synchronisation failure — ARTOS servo drive firmware corruption, encoder cable intermittency, or servo amplifier capacitor degradation causes loss of real-time position feedback and drives indexing off-cycle.
- ✓Vibratory feeder amplitude loss or no vibration — Electromagnetic coil burn-out, ceramic magnet demagnetisation due to overheat, or tuning spring fatigue in ARTOS vibratory feeders reduces vibration energy below component-feed threshold.
- ✓Control card intermittent faults or no communication — ARTOS motion controller relay contacts oxidise, capacitors dry out, or solder joints crack under thermal cycling and vibration. Communication module firmware degrades with power transients.
- ✓Pneumatic assembly module slow or stuck actuation — ARTOS pneumatic proportional valve spool stiction, internal seal wear, and solenoid coil resistance drift cause slow response time and loss of precision grip or insertion force.
- ✓Gearbox backlash increase or rattle during indexing — ARTOS precision gearbox helical teeth wear or become chipped after 500K+ hours. Bearing preload springs relax, allowing gear mesh play to increase beyond specification.
How We Repair Your ARTOS Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using ARTOS Equipment
We serve plant maintenance teams across all major industries where ARTOS automation is deployed.
Frequently Asked Questions — ARTOS Repairs
Do you repair ARTOS equipment anywhere in India?+
Yes. Synchronics Electronics is an authorised service centre for ARTOS motion control and indexing systems across India. We offer PAN India door pickup and drop from all major metros — Mumbai, Delhi, Pune, Chennai, Hyderabad, Ahmedabad, Kolkata, and 100+ smaller cities. All repairs are performed at our fully equipped Vadodara facility with CNC test benches and ARTOS diagnostic software. Typical turnaround is 7-14 working days.
What is the typical cost and time to repair an ARTOS indexer that has lost accuracy?+
Repair cost depends on wear severity — bearing replacement and recalibration typically ranges INR 15,000 to 35,000. If cam followers or gears are damaged, cost rises to INR 40,000-70,000. Turnaround is 10-12 working days including disassembly, parts sourcing, precision machining, assembly, and 500-cycle validation bench test. Synchronics provides detailed quotation after visual inspection.
Can you repair older ARTOS indexers from the 1990s or early 2000s?+
Absolutely. Synchronics maintains extensive ARTOS parts archives and can source cam mechanisms, bearings, gearboxes, and mechanical subassemblies for legacy models from the 1990s onward. We also reverse-engineer missing parts using precision casting and CNC machining. Many Indian automotive and pharma OEMs still operate two-decade-old ARTOS systems — we keep them running.
What is your warranty on ARTOS repair work?+
All Synchronics ARTOS repairs carry a 12-month parts and labour warranty. We guarantee zero indexing position drift beyond original tolerance, full servo synchronisation accuracy, and vibration feeder amplitude to spec. If any repaired unit fails within warranty, we repair or replace free. We also provide post-repair calibration certificates for regulated industries like pharma.
Do you offer ARTOS preventive maintenance contracts for Indian manufacturing plants?+
Yes. Synchronics offers annual and quarterly preventive maintenance (PM) contracts for ARTOS indexers, feeders, and control systems. PM includes bearing inspection and re-greasing, backlash measurement, servo gain tuning, control card capacitor check, and firmware update. Contracts start at INR 8,000 per unit per year for quarterly visits. Contact our service sales team for customised plant-wide maintenance plans.
How do I send my ARTOS unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a ARTOS drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on ARTOS repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your ARTOS unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
ARTOS Repair Catalog
No products found for ARTOS
Don't See Your ARTOS Model Listed?
We repair the full range of ARTOS industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.
Free evaluation • 6-month warranty • PAN India pickup
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service