ATERMES Repair Services India
ATERMES is a French specialist in thermal regulation systems, energy recovery solutions, and industrial climate control equipment serving manufacturing plants, data centres, and process industries worldwide. With growing adoption across Indian steel mills, pharmaceutical facilities, and automotive OEMs, ATERMES equipment has become critical to temperature-dependent production environments where precision and reliability determine output quality.
ATERMES is a French specialist in thermal regulation systems, energy recovery solutions, and industrial climate control equipment serving manufacturing plants, data centres, and process industries worldwide. With growing adoption across Indian steel mills, pharmaceutical facilities, and automotive OEMs, ATERMES equipment has become critical to temperature-dependent production environments where precision and reliability determine output quality.
Synchronics repairs the complete ATERMES thermal control and energy management portfolio across India — from chiller electronics and compressor management systems to heat recovery units and temperature monitoring controllers. Our 180-engineer team has logged 29 years of expertise in Indian manufacturing environments, where ATERMES equipment operates under extreme thermal stress. We deliver PAN-India rapid response, factory-standard repairs, and preventive maintenance programs that keep ATERMES systems optimised for India's demanding industrial climate.
Specialized ATERMES thermal control and chiller system repair across Indian manufacturing plants.
ATERMES Product Lines We Repair
Our engineers are trained on the full ATERMES product range. Below are the major product families we service.
ATERMES Chiller Control Units
Microprocessor-based chiller management and cooling loop regulation systems. Common faults include sensor calibration drift, refrigerant pressure relay failures, and compressor contactor stiction under high ambient Indian temperatures affecting pharmaceutical and food processing plants.
ATERMES Heat Recovery and Energy Systems
Waste heat capture and thermal energy storage controllers for steam systems and process cooling loops. Frequent issues include modulating valve electronic failures, temperature sensor malfunction in high-vibration environments, and communication protocol loss between recovery unit and plant SCADA.
ATERMES Precision Temperature Transmitters
Multi-channel RTD and thermocouple signal conditioning modules with 4-20mA output for critical manufacturing processes. Repair demands include terminal block corrosion from humid factory air, amplifier circuit noise immunity issues, and signal isolation failures in metal-intensive environments.
ATERMES Compressor Management Electronics
Capacity modulation and safety control boards for industrial reciprocating and rotary screw compressors used in steel tempering and pneumatic systems. Typical failures: discharge pressure transducer faults, oil pressure switch debouncing issues, and thermal overload nuisance trips in monsoon season.
ATERMES Environmental Monitoring Panels
Multi-parameter environmental control for cleanrooms, cold storage, and process validation areas across pharma, biotech, and food sectors. Common defects: humidity sensor drift, data logging memory corruption, relay contact erosion from switching transients, and network interface failures.
Why Choose Synchronics for ATERMES Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on ATERMES equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common ATERMES Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in ATERMES equipment arriving at our workshop.
- ✓Chiller compressor fails to modulate or cycles excessively — ATERMES chiller control boards experience compressor relay contact wear and temperature sensor calibration drift under continuous operation in Indian heat. Pressure transducers also lose accuracy when exposed to monsoon-season humidity, causing false high-pressure shutdowns.
- ✓Temperature reading fluctuation or sensor reading fails — ATERMES RTD transmitters and thermocouple modules suffer signal noise ingress from adjacent motor power lines and VFD harmonics common in Indian manufacturing plants. Cable shield corrosion and connector oxidation degrade signal integrity, especially in dusty foundry and steel mill environments.
- ✓Heat recovery system valve sticks or fails to modulate — ATERMES heat recovery control boards drive modulating solenoid valves that accumulate mineral scale and sludge in water cooling loops, particularly in areas with hard water supply. Electronic coil drivers also fail from sustained thermal stress and moisture ingress in non-climate-controlled electrical rooms.
- ✓Compressor thermal overload relay nuisance tripping — ATERMES compressor management modules experience false thermal trips during monsoon season due to humidity-induced sensor leakage currents and relay contact bounce from power supply transients. Discharge pressure switches also develop contact chatter in facilities with poor power quality.
- ✓Environmental monitoring panel communication loss or data corruption — ATERMES environmental control panels running in pharmaceutical cleanrooms and cold storage suffer network interface failures from ESD events during manual maintenance. Flash memory also becomes unreliable from thermal cycling, particularly in uninsulated electrical enclosures exposed to Indian summer heat.
- ✓Power supply failure or fuse blowing repeatedly — ATERMES thermal control boards experience power supply failures from voltage spikes on Indian industrial power lines, inadequate input filtering, and electrolytic capacitor dry-out from continuous operation in hot electrical rooms without air conditioning.
How We Repair Your ATERMES Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using ATERMES Equipment
We serve plant maintenance teams across all major industries where ATERMES automation is deployed.
Frequently Asked Questions — ATERMES Repairs
Do you repair ATERMES equipment anywhere in India?+
Yes. Synchronics repairs the full ATERMES product range — chiller controls, heat recovery systems, temperature transmitters, compressor management modules, and environmental monitoring panels. We offer PAN India door pickup from Mumbai, Delhi, Pune, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, and all other industrial cities. Same facility in Vadodara, Gujarat — 180+ engineers and full component inventory.
What is the typical turnaround time for ATERMES chiller control board repair?+
Standard turnaround is 5-7 working days for chiller control modules. Emergency expedite available 48-72 hours for critical pharmaceutical and cold storage applications. We provide loaner units during repair and daily status updates. Synchronics maintains ATERMES-compatible replacement boards for immediate swap-out in emergency situations.
Can you repair ATERMES sensor transmitters that show calibration drift?+
Absolutely. Synchronics recalibrates ATERMES RTD transmitters, thermocouple modules, and pressure transducers against NIST-traceable standards using ISO 9001-certified test equipment. We document calibration certificates for compliance with pharmaceutical GMP and food safety regulations, then seal modules to prevent re-contamination.
Do you carry spare parts for ATERMES thermal control systems in stock?+
Yes. Synchronics stocks genuine and equivalent components for ATERMES chiller electronics, solenoid valves, relay modules, sensor assemblies, and power supplies across our Vadodara facility. For rare legacy ATERMES models, we source parts through European distributors with 2-3 week lead time and offer reverse-engineering alternatives where original parts are obsolete.
How do I prevent ATERMES equipment failures in high-temperature monsoon environments?+
Synchronics recommends annual thermal and humidity cycling testing, conformal coating application to circuit boards, replacement of electrolytic capacitors on 5-year cycles, and installation of thermal management accessories in non-air-conditioned enclosures. We provide preventive maintenance contracts including quarterly inspections, component upgrades, and spare part provisioning — critical for steel mills, foundries, and textile operations across India.
How do I send my ATERMES unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a ATERMES drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on ATERMES repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your ATERMES unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
ATERMES Repair Catalog
No products found for ATERMES
Don't See Your ATERMES Model Listed?
We repair the full range of ATERMES industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.
Free evaluation • 6-month warranty • PAN India pickup
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service