CATH-TECH Repair Services India
CATH-TECH specializes in advanced catheterization systems, interventional fluoroscopy equipment, and real-time imaging guidance platforms for minimally invasive procedures. The company serves cardiac, peripheral vascular, and neurointerventional markets globally. In India, CATH-TECH systems are deployed across major tertiary care hospitals, cardiac centers, and interventional radiology departments, supporting high-acuity patient care and complex endovascular procedures.
CATH-TECH specializes in advanced catheterization systems, interventional fluoroscopy equipment, and real-time imaging guidance platforms for minimally invasive procedures. The company serves cardiac, peripheral vascular, and neurointerventional markets globally. In India, CATH-TECH systems are deployed across major tertiary care hospitals, cardiac centers, and interventional radiology departments, supporting high-acuity patient care and complex endovascular procedures.
Synchronics repairs the complete CATH-TECH imaging and control ecosystem — fluoroscopy generators, digital subtraction imaging modules, motion control systems, and operator console electronics. Our 180+ engineers have repaired CATH-TECH systems across Indian hospital networks, managing everything from high-voltage generator failures to image processing board faults. We understand the critical nature of cathlab equipment and deliver certified, validated repairs that restore imaging quality and procedural safety.
Certified CATH-TECH fluoroscopy and interventional imaging system repair across India.
CATH-TECH Product Lines We Repair
Our engineers are trained on the full CATH-TECH product range. Below are the major product families we service.
Imaging Generator Systems
High-frequency fluoroscopy generators delivering real-time X-ray imaging for interventional procedures. Common faults include filament aging, high-voltage transformer insulation breakdown, and power regulation failures affecting image contrast and exposure consistency.
Digital Subtraction Imaging Module (DSIM)
Real-time image processing and subtraction units for vascular roadmap and navigation. Repair issues include GPU memory faults, frame grabber card degradation, and timing synchronization loss between fluoroscopy and processor modules.
Motion Control and Positioning System
Servo-driven C-arm positioning and table motion controllers managing multi-axis movement. Typical failures involve encoder reading errors, servo amplifier thermal faults, and emergency stop circuit faults under heavy duty cycles.
Operator Console Electronics
Touch-enabled control stations with real-time monitoring, workflow integration, and patient data interface. Common defects include capacitive touchscreen sensor failure, main logic board thermal damage, and communication interface degradation.
Cooling and Power Management
Liquid cooling loops and redundant power supplies maintaining thermal stability during long interventional sessions. Failures include coolant pump cavitation, heat exchanger fouling, and power distribution board relay arcing.
Patient Dose Monitoring and Safety
Real-time radiation dose tracking and automatic exposure control electronics. Repair scope covers ionization chamber interface circuits, dose rate sensor conditioning modules, and safety interlock relay failures.
Why Choose Synchronics for CATH-TECH Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on CATH-TECH equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common CATH-TECH Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in CATH-TECH equipment arriving at our workshop.
- ✓Filament emission failure in high-voltage tube — CATH-TECH fluoroscopy tubes operate at sustained high milliamperage during interventional sessions. Tungsten filament evaporation accelerates with age, thermal cycling, and inadequate preheating sequences, resulting in low or absent X-ray output and exposure errors.
- ✓High-voltage transformer insulation breakdown — Oil-immersed HV transformers in CATH-TECH generators face dielectric stress from voltage transients, moisture ingress, and prolonged duty cycles. Insulation degradation manifests as intermittent arcing, kVp regulation instability, and eventual transformer shutdown via protective relay activation.
- ✓Digital Subtraction Module frame grabber card failure — CATH-TECH DSIM frame grabber cards process high-bandwidth fluoroscopy video streams continuously. Component aging, thermal cycling around heat-generating GPUs, and burst power transients degrade PCIe connectors and analog-to-digital converter chips, causing image loss or pixelation.
- ✓C-arm encoder position tracking error — CATH-TECH motion controllers rely on incremental optical encoders mounted on servo motor shafts. Mechanical vibration from repeated positioning, bearing wear, and dirt ingress in encoder optics cause dropped pulses, 3D reconstruction errors, and unsafe positioning offsets during procedures.
- ✓Operator console touchscreen unresponsive or ghosting — CATH-TECH console touchscreens endure frequent contact, occasional fluid spills, and electromagnetic noise from adjacent X-ray tubes and servo motors. Capacitive sensor drift and controller IC faults create dead zones, false touches, or complete unresponsiveness affecting workflow.
- ✓Dose monitoring sensor signal loss or drift — CATH-TECH ionization chambers and dose rate sensors provide real-time radiation safety feedback. Sensor aging, connector corrosion in humid hospital environments, and signal conditioning amplifier failures cause dose underreporting or false high-dose alarms that halt procedures.
How We Repair Your CATH-TECH Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using CATH-TECH Equipment
We serve plant maintenance teams across all major industries where CATH-TECH automation is deployed.
Frequently Asked Questions — CATH-TECH Repairs
Do you repair CATH-TECH equipment anywhere in India?+
Yes. Synchronics repairs the complete CATH-TECH product range — fluoroscopy generators, digital subtraction imaging modules, motion control systems, operator consoles, and safety electronics. We offer PAN India door pickup and repair logistics from Mumbai, Delhi, Pune, Chennai, Hyderabad, Ahmedabad, Kolkata, and all other major cities. All repairs are performed at our certified facility in Vadodara, Gujarat, with turnaround typical 5-7 working days for major faults.
What certifications does Synchronics hold for CATH-TECH repairs?+
Synchronics maintains ISO 9001:2015 quality certification and medical device repair competency verified through training on CATH-TECH imaging physics, interventional workflows, and safety standards. Our engineers are trained in electrical safety, X-ray protection compliance, and dose monitoring verification. We issue calibrated test reports and compliance documentation with every CATH-TECH repair.
Can Synchronics repair CATH-TECH high-voltage generators on-site at our cathlab?+
For non-critical HV generator work, yes — our field service engineers can perform tube testing, filament conditioning, and routine maintenance at your site in major metro areas. However, transformer reconditioning, secondary winding repairs, and full HV testing require controlled laboratory conditions in Vadodara to ensure patient safety and imaging accuracy. We coordinate hospital schedules to minimize downtime.
How do you validate CATH-TECH image quality after repair?+
Synchronics uses standardized CATH-TECH calibration phantoms, test charts, and dose monitoring equipment to verify image contrast, spatial resolution, and detector response post-repair. We perform fluoroscopy linearity tests, subtraction image quality assessment, and positioning accuracy validation per CATH-TECH service manuals. All validation results are documented and provided as compliance evidence.
What is your typical repair cost for CATH-TECH fluoroscopy system faults?+
Costs depend on fault scope — filament/tube conditioning runs INR 15,000-40,000; frame grabber card replacement INR 35,000-65,000; HV transformer diagnostics INR 10,000-25,000; console electronics INR 25,000-55,000. We provide free diagnostic assessment and cost estimate before commencing repair. Many Indian hospitals find preventive servicing (annual calibration, component aging checks) more cost-effective than emergency repairs.
How do I send my CATH-TECH unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a CATH-TECH drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on CATH-TECH repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your CATH-TECH unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
CATH-TECH Repair Catalog
No products found for CATH-TECH
Don't See Your CATH-TECH Model Listed?
We repair the full range of CATH-TECH industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.
Free evaluation • 6-month warranty • PAN India pickup
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service