CEL-TEC Repair Services India
CEL-TEC is a specialist UK manufacturer of precision thermal imaging cameras, infrared sensors, and electrical measurement instruments. Their products are trusted across global industrial sectors for non-destructive testing, predictive maintenance, and thermal diagnostics. CEL-TEC equipment has gained significant adoption in Indian manufacturing, power utilities, and FMCG facilities for condition monitoring and energy audits.
CEL-TEC is a specialist UK manufacturer of precision thermal imaging cameras, infrared sensors, and electrical measurement instruments. Their products are trusted across global industrial sectors for non-destructive testing, predictive maintenance, and thermal diagnostics. CEL-TEC equipment has gained significant adoption in Indian manufacturing, power utilities, and FMCG facilities for condition monitoring and energy audits.
Synchronics Electronics repairs the full CEL-TEC thermal imaging and sensor product portfolio across India. Our engineers are factory-trained on CEL-TEC infrared cameras, temperature measurement modules, and sensor interfaces. We handle sensor calibration drift, detector failures, and electronics board repairs — restoring CEL-TEC instruments to original factory specifications within 5-7 working days.
Factory-authorized CEL-TEC thermal camera and sensor repair — calibration, detector restoration, firmware updates.
CEL-TEC Product Lines We Repair
Our engineers are trained on the full CEL-TEC product range. Below are the major product families we service.
CEL-TEC Thermal Imaging Cameras
Portable and fixed-mount infrared cameras for temperature measurement and thermal anomaly detection. Common issues include detector degradation, radiometric calibration drift, lens fogging, and internal electronic component failures affecting image quality and temperature accuracy.
CEL-TEC Infrared Sensors and Probes
Standalone IR sensor modules and temperature probes for integration into plant monitoring systems. Typical failures include sensor element aging, output signal conditioning failures, connector corrosion, and loss of thermistor linearity over time.
CEL-TEC Data Logging and Analysis Units
Portable measurement devices that record thermal and electrical data for trending and predictive maintenance. Common repair needs include SD card interface failures, LCD screen damage, battery charging circuit faults, and data buffer memory corruption.
CEL-TEC Temperature Transmitters
4-20mA and digital output temperature transmitters for DCS and PLC integration. Repair issues often stem from 24VDC power supply failures, analog output amplifier drift, RTD signal conditioning faults, and EMI-induced noise on output lines.
Why Choose Synchronics for CEL-TEC Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on CEL-TEC equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common CEL-TEC Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in CEL-TEC equipment arriving at our workshop.
- ✓Thermal detector non-responsiveness or zero output — Microbolometer or FPA detector element degradation due to thermal cycling, manufacturing defect, or age. CEL-TEC detectors are sensitive to ESD and internal thermal stress during storage or field use.
- ✓Radiometric calibration drift exceeding 5% error — Optical path contamination, internal lens coating degradation, or reference junction temperature compensation circuit aging. CEL-TEC instruments require periodic recalibration in stable thermal environments to maintain ±2% accuracy.
- ✓USB, Ethernet, or serial communication port failure — Connector corrosion from moisture ingress, ESD damage to port interface ICs, or PCB solder joint cracking around connector footprints due to vibration or thermal stress on factory floors.
- ✓4-20mA output stuck at 4mA or full scale (20mA) — Temperature transmitter output amplifier IC failure, DAC (digital-to-analog converter) malfunction, or broken sensor input signal path. CEL-TEC transmitters use precision op-amps that can fail under high EMI environments common in Indian industrial plants.
- ✓Lithium-ion battery no longer charges or retains charge — Charger circuit component failure, battery management IC (BMS) shutdown, or internal battery cell degradation. CEL-TEC portable instruments used in hot industrial environments experience accelerated battery aging.
- ✓LCD display flickering, dead pixels, or complete blackout — LCD backlight driver IC failure, LVDS (low-voltage differential signaling) cable disconnection due to vibration, or TFT panel internal seal breach allowing liquid crystal leakage.
How We Repair Your CEL-TEC Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using CEL-TEC Equipment
We serve plant maintenance teams across all major industries where CEL-TEC automation is deployed.
Frequently Asked Questions — CEL-TEC Repairs
Do you repair CEL-TEC equipment anywhere in India?+
Yes. Synchronics repairs the full CEL-TEC product range — thermal imaging cameras, infrared sensors, temperature transmitters, and data logging units. We offer PAN India door pickup from Mumbai, Delhi, Pune, Chennai, Hyderabad, Ahmedabad, Bengaluru, Kolkata, and all other cities. Standard turnaround is 5-7 working days at our factory-equipped facility in Vadodara, Gujarat.
Can you recalibrate my CEL-TEC thermal camera to NIST standards?+
Absolutely. Synchronics provides NIST-traceable radiometric recalibration for all CEL-TEC thermal imaging cameras. We use precision blackbody radiation sources maintained at ±0.5°C stability. Recalibration includes detector performance verification, optical path inspection, and fresh calibration certificates valid for 12 months. Service fee includes sensor element health diagnostics.
What is the typical repair cost for a CEL-TEC transmitter with 4-20mA output failure?+
Transmitter output circuit repairs typically range from INR 8,000 to 15,000 depending on component damage extent. Diagnostics charge (INR 1,200) is applied toward repair if you proceed. We provide detailed failure reports showing root cause and replaced components. Warranty is 6 months on all transmitter repairs at Synchronics.
Do you stock original CEL-TEC spare parts and replacement modules?+
We maintain stock of common CEL-TEC replacement modules including thermal detectors, temperature transmitter boards, and sensor elements for rapid turnaround repairs. For specialized assemblies, we source from authorized CEL-TEC distributors with typical lead times of 10-14 days. We always use genuine components and provide component-level traceability documentation.
Can you repair CEL-TEC infrared cameras damaged by moisture or dust ingress?+
Yes. Synchronics performs comprehensive cleaning, corrosion removal, and moisture remediation on CEL-TEC cameras. We disassemble instruments, ultrasonically clean PCB sections, replace corroded connectors, and dry internal optics using controlled thermal chambers. Post-repair calibration ensures optics clarity and detector responsiveness are fully restored to factory performance.
How do I send my CEL-TEC unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a CEL-TEC drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on CEL-TEC repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your CEL-TEC unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
CEL-TEC Repair Catalog
No products found for CEL-TEC
Don't See Your CEL-TEC Model Listed?
We repair the full range of CEL-TEC industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.
Free evaluation • 6-month warranty • PAN India pickup
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service