Skip to main content
OPEN NOW
0s

0% of today's working hours elapsed

Office Hours (IST)

Track Repair →
0 Products

CINTEX Repair Services India

CINTEX is a German specialist in industrial control systems, programmable logic controllers (PLCs), and distributed automation solutions for process and discrete manufacturing. Known for reliability in harsh environments, CINTEX equipment is widely deployed across Indian textile mills, chemical plants, food processing facilities, and automotive assembly lines. Their modular architecture and rugged design make them popular in India's heavy manufacturing sector.

CINTEX is a German specialist in industrial control systems, programmable logic controllers (PLCs), and distributed automation solutions for process and discrete manufacturing. Known for reliability in harsh environments, CINTEX equipment is widely deployed across Indian textile mills, chemical plants, food processing facilities, and automotive assembly lines. Their modular architecture and rugged design make them popular in India's heavy manufacturing sector.

Synchronics has built deep expertise repairing CINTEX PLCs, I/O modules, communication gateways, and automation controllers. Our 180+ engineers understand CINTEX firmware, protocol stacks, and hardware failure modes intimately. We repair all CINTEX industrial electronics with factory-standard diagnostics, rapid turnaround, and full documentation — restoring uptime for Indian manufacturers who depend on CINTEX reliability.

0
Products in Catalog
0+
Product Categories
6 Mo
Repair Warranty
32+
Years Experience
Repair Expertise

CINTEX Product Lines We Repair

Our engineers are trained on the full CINTEX product range. Below are the major product families we service.

CINTEX CP-Series PLCs

Compact programmable logic controllers for discrete and hybrid automation. Common faults include corrupted program memory, input/output module failures, and communication interface degradation causing loss of signal integrity.

CP-2000CP-3000CP-5000CP-8000

CINTEX DM-Series Distributed I/O Modules

Remote digital and analog input/output modules used in decentralized control architectures. Typical failures include relay contact wear, analog converter drift, and CAN/Profibus interface lockup preventing node communication.

DM-04DDM-08ADM-16DIDM-24DO

CINTEX CG-Series Communication Gateways

Protocol converters bridging Profibus, Modbus, and Industrial Ethernet networks. Failure modes include gateway firmware crashes, network isolation errors, and CRC checksum failures in data transmission.

CG-PB-01CG-MB-02CG-IE-03

CINTEX TS-Series Touch Screen Terminals

Industrial human-machine interfaces for operator control and process monitoring. Common issues include display degradation, capacitive touchscreen unresponsiveness, and embedded OS boot failures.

TS-7TS-10TS-15TS-19

CINTEX PS-Series Power Supply Modules

Redundant and non-redundant 24VDC switching power supplies for control cabinet integration. Failure patterns include capacitor degradation, over-current trip loops, and voltage regulation drift under load.

PS-24/5PS-24/10RPS-24/20R
Why Us

Why Choose Synchronics for CINTEX Repairs?

🔬

PCB-Level Expertise

We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on CINTEX equipment.

⚡

Fast Turnaround

Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.

🛡️

6-Month Warranty

Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.

📦

All-India Service

Couriered repairs accepted from any city in India — Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.

Diagnosis

Common CINTEX Equipment Faults We Fix

Based on 30+ years of repair data, these are the most frequent failure modes we see in CINTEX equipment arriving at our workshop.

  • ✓CINTEX CP-Series program memory corruption — Power loss during EEPROM write cycles or firmware update interruption leaves program memory in inconsistent state, preventing PLC boot sequence or causing random instruction execution errors.
  • ✓DM-Series analog input drift and scaling errors — 24-month capacitor aging in analog signal conditioning circuits, combined with temperature fluctuations in Indian manufacturing environments, causes 4-16mA input signals to read incorrectly, throwing proportional process control out of range.
  • ✓CG-Series gateway Profibus node dropout — CAN transceiver isolation failure or corrupted gateway firmware causes cyclical loss of Profibus communication every 30-60 seconds, appearing as intermittent signal loss rather than complete failure — difficult to diagnose.
  • ✓CP-Series real-time clock (RTC) battery failure — Lithium coin cell battery depletion after 5-7 years causes timestamp loss, event logging corruption, and scheduled automation tasks to skip execution without warning — critical in pharmaceutical and food processing plants.
  • ✓PS-Series 24VDC output voltage regulation failure — Aging of tantalum filter capacitors combined with high ambient temperature in Indian textile mills causes output voltage to drift from 24V nominal to 27-28V, damaging downstream logic modules.
Process

How We Repair Your CINTEX Unit

📥
Step 1

Receive & Log

Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.

🔬
Step 2

Fault Diagnosis

Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.

🔧
Step 3

Component Repair

Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.

✅
Step 4

Full-Load Test

Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.

Sectors

Industries Using CINTEX Equipment

We serve plant maintenance teams across all major industries where CINTEX automation is deployed.

Textiles and spinning millsFood and beverage processingPharmaceutical manufacturingAutomotive component assemblyChemical and petrochemical refiningPulp and paper productionCement and building materialsSteel and metal fabrication
FAQ

Frequently Asked Questions — CINTEX Repairs

Is Synchronics an authorised CINTEX service centre?+

No. Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider. We are not affiliated with, authorised by, sponsored by or endorsed by CINTEX or its group companies, and we are not an official CINTEX service centre, dealer or representative. Brand names and model numbers are used only to identify the equipment we repair. If your equipment is under manufacturer warranty or a service contract, please contact the manufacturer first — third-party repair may affect that cover.

Do you repair CINTEX equipment anywhere in India?+

Yes. Synchronics repairs all CINTEX product lines — PLCs, I/O modules, communication gateways, HMI terminals, and power supplies. Repair work is performed in our fully equipped facility in Vadodara, Gujarat.

What is the typical turnaround time for CINTEX PLC repair?+

Standard CINTEX CP-Series PLC repair takes 5-7 working days for diagnostics, component replacement, firmware validation, and testing. Express service (3-4 days) is available for critical production line failures. We provide daily status updates and expedited return shipping at customer request.

Can you repair CINTEX equipment with corrupted firmware?+

Yes. Synchronics has factory-level JTAG and bootloader recovery tools for all CINTEX control series. We can extract corrupted firmware, perform bit-level analysis, restore from backup images, or reflash official CINTEX firmware where recovery is possible. If recovery fails, we source compatible replacement modules at competitive rates.

How do I know if my CINTEX CP-Series PLC is beyond repair?+

Our engineers perform free diagnostic assessment via email or phone — describe symptoms, error codes (if visible), and LED status. Most CP-Series failures are repairable. Only catastrophic failures (burned circuit boards, melted components, water damage) may be uneconomical. We always provide honest assessment and alternative sourcing if repair costs exceed replacement.

How do I send my CINTEX unit for repair?+

Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt.

What is the cost of repairing a CINTEX drive or PLC?+

Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.

What warranty do you provide on CINTEX repairs?+

All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.

Do you provide a no-fix, no-fee guarantee?+

Yes. For standard units, evaluation is free and included in the repair cost — if we cannot repair your CINTEX unit, no repair charge is raised. A physical inspection charge applies only if the unit has already been subjected to a third-party repair attempt, and we tell you before we start.

CINTEX Repair Catalog

No products found for CINTEX

🔧

Don't See Your CINTEX Model Listed?

We repair the full range of CINTEX industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.

Free evaluation • 6-month warranty • Pan-India service

32+
Years in Business
80,000+
Units Repaired
150+
Workstations
4.8★
682 Reviews

Disclaimer

CINTEX and all associated product names and model numbers are trademarks of their respective owner(s). Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider and is not affiliated with, authorised by, sponsored by or endorsed by CINTEX. Product names and model numbers are used solely to identify the equipment on which repair services are offered, and no trademark ownership is claimed or implied.

Trusted Since 1994 · ISO Certified · 32+ Years

Get Your Equipment
Back in Action — Fast

Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.

✓

Free Evaluation

No obligation

⚡

48hr Turnaround

Fastest in India

🛡

6-Month Warranty

Every repair

₹

No Fix, No Charge

Zero risk policy

📦

Pan-India Service

Ship from anywhere