COMPUTER PRODUCTS Repair Services India
Computer Products is a leading American manufacturer of industrial-grade power supplies, embedded computing systems, and ruggedized control electronics. Known for high-reliability DC power conversion and harsh-environment computing platforms, Computer Products serves global automation, defence, aerospace, and industrial control sectors. Their products are widely deployed across Indian manufacturing plants, heavy industries, and critical infrastructure applications where uptime is non-negotiable.
Computer Products is a leading American manufacturer of industrial-grade power supplies, embedded computing systems, and ruggedized control electronics. Known for high-reliability DC power conversion and harsh-environment computing platforms, Computer Products serves global automation, defence, aerospace, and industrial control sectors. Their products are widely deployed across Indian manufacturing plants, heavy industries, and critical infrastructure applications where uptime is non-negotiable.
Synchronics specializes in Computer Products industrial electronics repair — from redundant power supplies and embedded industrial computers to harsh-environment control modules and custom logic boards. Our 180+ engineers have over three decades of expertise restoring Computer Products equipment to OEM specifications. Indian manufacturers trust Synchronics for Computer Products repair because we combine deep technical knowledge, rapid turnaround, and genuine parts sourcing with on-site support across all major Indian industrial hubs.
Synchronics: India's trusted Computer Products power supply and industrial computer repair specialist.
COMPUTER PRODUCTS Product Lines We Repair
Our engineers are trained on the full COMPUTER PRODUCTS product range. Below are the major product families we service.
Redundant/Modular Power Supplies (RPS, SRP, DPA series)
Computer Products redundant DC power systems engineered for mission-critical applications. Common repairs include rectifier module failures, control circuit board defects, cooling fan breakdowns, and output voltage regulation faults. Indian steel mills and process plants rely on these for uninterrupted control power.
Embedded Industrial Computers (EPC, IPC series)
Rugged, fanless embedded computing platforms for factory automation and process control. Typical faults include motherboard corrosion, RAM module degradation, storage device failure, and industrial connector damage in high-vibration environments.
Harsh Environment Control Modules (HEM, XPC series)
Sealed logic boards and controller modules rated for extreme temperature, humidity, and vibration. Repair challenges include conformal coating deterioration, electrolytic capacitor leakage, relay contact wear, and enclosure seal failures due to thermal cycling.
DC-DC Converter Modules (DCM, MDL series)
Isolated and non-isolated DC-to-DC conversion modules used in distributed power architectures. Common defects include transformer winding shorts, primary-side MOSFET burnout, feedback circuit drift, and output capacitor ESR degradation.
Real-Time Industrial Control Engines (RTCE, PLC-E series)
Computer Products programmable control units with real-time processing for critical manufacturing loops. Repair involves firmware restoration, I/O module diagnostics, communication protocol debugging, and network interface card replacement.
Power Quality & Protection Boards (PQB, SPB series)
Surge suppression, overvoltage protection, and EMI filtering modules. Typical failures include varistor degradation, fuse corruption, and PCB trace burn-through from transient events in Indian industrial power grids.
Why Choose Synchronics for COMPUTER PRODUCTS Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on COMPUTER PRODUCTS equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common COMPUTER PRODUCTS Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in COMPUTER PRODUCTS equipment arriving at our workshop.
- ✓Output voltage drift or regulation failure — Computer Products power supplies employ precision feedback networks; aging electrolytic capacitors in reference circuits or feedback divider resistor drift cause output voltage to creep outside specification. Thermal cycling in Indian manufacturing plants accelerates capacitor aging.
- ✓Rectifier module short or open circuit — Computer Products modular power supplies use plug-in rectifier cards; failures occur when primary bridge diodes fail due to switching transients, thermal stress, or contamination. Moisture ingress into module connectors also causes intermittent faults.
- ✓Embedded computer boot failure or kernel panic — Computer Products industrial PCs often fail to initialize due to corrupted firmware, failed RAM modules, or disk degradation in high-vibration factory environments. Flash memory wear and BIOS checksum errors are common in aged systems.
- ✓Cooling fan failure or thermal shutdown — Computer Products control modules in India's humid, dusty industrial plants experience fan bearing wear and bearing cage corrosion. Dust accumulation on heatsink fins restricts airflow, triggering thermal sensors and system shutdown. DC brushless motor windings also degrade in high-temperature environments.
- ✓I/O module intermittent signal loss — Computer Products real-time control engines use high-density connector modules; intermittent faults result from connector pin corrosion, cracked solder joints at module interface, or damaged trace copper. Poor environmental sealing allows condensation and galvanic corrosion in humid factories.
- ✓Logic board EEPROM or Flash memory corruption — Computer Products embedded systems store calibration data and firmware in non-volatile memory; power transients, ESD events, or aged write-enable circuits cause data corruption. Repeated power-cycle events in unstable Indian industrial power grids accelerate failure.
How We Repair Your COMPUTER PRODUCTS Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using COMPUTER PRODUCTS Equipment
We serve plant maintenance teams across all major industries where COMPUTER PRODUCTS automation is deployed.
Frequently Asked Questions — COMPUTER PRODUCTS Repairs
Do you repair Computer Products equipment anywhere in India?+
Yes. Synchronics repairs all Computer Products industrial electronics — power supplies, embedded computers, control modules, and I/O boards — at our 180+ engineer facility in Vadodara, Gujarat. We offer PAN India door pickup and logistics from Mumbai, Delhi, Pune, Bengaluru, Chennai, Hyderabad, Ahmedabad, Jaipur, and all metro cities. Typical repair turnaround is 7-10 business days for standard faults; expedited service available for critical equipment.
Can Synchronics repair Computer Products power supplies that no longer have warranty?+
Absolutely. Synchronics specializes in out-of-warranty Computer Products repair. We stock genuine DC-to-DC converter modules, rectifier cards, control board components, and sealed power connectors compatible with Computer Products RPS, SRP, DPA, and DCM series. Whether your power supply is 5 years old or 15 years old, we restore it to OEM performance specifications and issue a 12-month repair warranty.
What is the typical cost to repair a Computer Products embedded industrial computer?+
Computer Products industrial PC repair costs depend on fault severity. Firmware restoration and RAM replacement typically runs INR 15,000-35,000. Full motherboard rework with component soldering, storage device replacement, or BIOS chip replacement ranges INR 35,000-65,000. Critical system boards with custom logic can reach INR 70,000+. We provide free diagnostic assessment and quotation within 24 hours of equipment receipt.
How quickly can Synchronics replace a failed Computer Products rectifier module in my power supply?+
If you have a spare rectifier module available, Synchronics can diagnose and swap the module the same day — typically 4-6 hours. If the module must be sourced, lead time is 3-5 business days within India. We maintain inventory of common Computer Products power supply modules (RPS-24, SRP-48, DPA-100 series) and can often ship a refurbished, tested module directly to your plant while your original unit is being repaired.
Does Synchronics offer on-site Computer Products equipment installation and commissioning after repair?+
Yes. For critical systems, Synchronics provides on-site installation, power-up testing, and commissioning across India. Our field engineers can verify output voltage stability, confirm signal integrity on I/O boards, run thermal performance tests, and integrate repaired Computer Products equipment back into your production line. On-site support costs INR 8,000-15,000 per day plus travel, depending on location and system complexity.
How do I send my COMPUTER PRODUCTS unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a COMPUTER PRODUCTS drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on COMPUTER PRODUCTS repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your COMPUTER PRODUCTS unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
COMPUTER PRODUCTS Repair Catalog
No products found for COMPUTER PRODUCTS
Don't See Your COMPUTER PRODUCTS Model Listed?
We repair the full range of COMPUTER PRODUCTS industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.
Free evaluation • 6-month warranty • PAN India pickup
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service