DANIEL Repair Services India
Daniel (a subsidiary of Emerson Electric) is a globally recognized pioneer in flow measurement, gas analysis, and process instrumentation. Founded in 1916, Daniel has been integral to oil and gas, petrochemical, and industrial process monitoring across six continents. In India, Daniel instruments are critical infrastructure in refineries, pipelines, and manufacturing plants, particularly in the oil and gas sector where measurement accuracy directly impacts operational efficiency and regulatory compliance.
Daniel (a subsidiary of Emerson Electric) is a globally recognized pioneer in flow measurement, gas analysis, and process instrumentation. Founded in 1916, Daniel has been integral to oil and gas, petrochemical, and industrial process monitoring across six continents. In India, Daniel instruments are critical infrastructure in refineries, pipelines, and manufacturing plants, particularly in the oil and gas sector where measurement accuracy directly impacts operational efficiency and regulatory compliance.
Synchronics Electronics specializes in repair and maintenance of Daniel instrumentation including differential pressure transmitters, ultrasonic flow meters, combustion analyzers, and data acquisition systems.
DANIEL Product Lines We Repair
Our engineers are trained on the full DANIEL product range. Below are the major product families we service.
Orifice Plate & DP Transmitters
Daniel differential pressure transmitters and orifice plate systems for custody transfer and process flow measurement. Common issues include diaphragm seal degradation, impulse line blockages, zero drift, and signal transmission failures in high-pressure applications.
Ultrasonic Flow Meters
Non-invasive Daniel ultrasonic meters for gas and liquid flow measurement with multi-path algorithms.
Gas Chromatographs & Analyzers
Daniel combustion analyzers and gas composition instruments for process control and emissions monitoring. Repair challenges include detector fouling, thermal instability, carrier gas contamination, and detector response degradation.
Custody Transfer Systems
Integrated Daniel metering skids for oil and gas exchange with simultaneous flow, temperature, and pressure measurement. Faults often stem from sensor array misalignment, corrector electronics failures, data communication dropouts, and environmental stress.
Electronic Devices & Transmitters
Daniel pressure, temperature, and multi-variable transmitters for industrial process loops. Common failures include 4-20mA loop failures, EMI susceptibility, capacitive sensor drift, and connector corrosion in coastal or chemically aggressive environments.
Flow Computer & Modular Systems
Daniel flow correction computers and modular instrumentation for real-time flow calculation and data logging. Typical issues include firmware corruption, memory loss, communication protocol mismatches, and thermal shutdown due to inadequate ventilation.
Why Choose Synchronics for DANIEL Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on DANIEL equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India — Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common DANIEL Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in DANIEL equipment arriving at our workshop.
- ✓Differential pressure transmitter zero drift — Daniel DP transmitters in custody transfer applications experience diaphragm seal degradation and impulse line sludge accumulation, causing creeping zero offset that violates ±0.5% accuracy tolerance required by API standards.
- ✓Ultrasonic transducer signal loss in dirty service — Daniel ultrasonic meters deployed in crude or multiphase pipelines suffer transducer coupling compound degradation and scale buildup, blocking acoustic transmission and causing flowrate calculation errors or meter shutdown.
- ✓Gas chromatograph detector baseline instability — Daniel CG20 and CG30 analyzers experience thermal cycling, detector contamination from carrier gas impurities, and internal electrical noise, resulting in erratic hydrocarbon composition readings and false alarms.
- ✓4-20mA transmitter loop failure — Daniel electronic transmitters fail due to input/output board corrosion, parasitic current leaks from cable grounding issues, or load resistor opens, resulting in floating output signal or complete loop dropout.
- ✓Custody transfer system data communication dropout — Daniel CMS skids experience intermittent Modbus RTU or Profibus communication failures due to cable EMI exposure, connector pin corrosion at metering junction boxes, or protocol timeout conflicts in multi-sensor arrays.
How We Repair Your DANIEL Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using DANIEL Equipment
We serve plant maintenance teams across all major industries where DANIEL automation is deployed.
Frequently Asked Questions — DANIEL Repairs
Is Synchronics an authorised DANIEL service centre?+
No. Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider. We are not affiliated with, authorised by, sponsored by or endorsed by DANIEL or its group companies, and we are not an official DANIEL service centre, dealer or representative. Brand names and model numbers are used only to identify the equipment we repair. If your equipment is under manufacturer warranty or a service contract, please contact the manufacturer first — third-party repair may affect that cover.
Do you repair Daniel equipment anywhere in India?+
Yes. Synchronics repairs the complete Daniel instrumentation portfolio — flow meters, differential pressure transmitters, gas analyzers, flow computers, and custody transfer systems. We maintain API 14.1 and ISO 6976 compliance for custody transfer applications.
Can you repair Daniel custody transfer meters with AGA-8 flow computer corrections?+
Yes. Synchronics specializes in Daniel CMS and integrated metering skids used in oil and gas custody exchange.
Do you service Daniel ultrasonic flow meters in multiphase environments?+
Absolutely. Daniel Ascent and Series 3098 ultrasonic meters are widely deployed in Indian oil production where crude, water, and gas coexist.
What is the turnaround time for Daniel gas chromatograph repair?+
Expedited service (3-5 days) is available for critical refinery applications. We provide loaner instruments upon request to minimize downtime during repair.
How do I send my DANIEL unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt.
What is the cost of repairing a DANIEL drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on DANIEL repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. For standard units, evaluation is free and included in the repair cost — if we cannot repair your DANIEL unit, no repair charge is raised. A physical inspection charge applies only if the unit has already been subjected to a third-party repair attempt, and we tell you before we start.
DANIEL Repair Catalog
No products found for DANIEL
Don't See Your DANIEL Model Listed?
We repair the full range of DANIEL industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.
Free evaluation • 6-month warranty • Pan-India service
Disclaimer
DANIEL and all associated product names and model numbers are trademarks of their respective owner(s). Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider and is not affiliated with, authorised by, sponsored by or endorsed by DANIEL. Product names and model numbers are used solely to identify the equipment on which repair services are offered, and no trademark ownership is claimed or implied.
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Service
Ship from anywhere