Skip to main content
OPEN NOW
0s

0% of today's working hours elapsed

Office Hours (IST)

Track Repair →
1 Products

EDDYFI Repair Services India

Eddyfi Technologies is a Canadian innovator specializing in advanced non-destructive testing (NDT) and inspection equipment, serving critical infrastructure sectors globally. Their portable and automated inspection systems detect flaws, corrosion, and material defects in metals, composites, and welds. Eddyfi has established significant presence across Indian manufacturing, power generation, aerospace, and oil-gas sectors where equipment reliability is mission-critical.

Eddyfi Technologies is a Canadian innovator specializing in advanced non-destructive testing (NDT) and inspection equipment, serving critical infrastructure sectors globally. Their portable and automated inspection systems detect flaws, corrosion, and material defects in metals, composites, and welds. Eddyfi has established significant presence across Indian manufacturing, power generation, aerospace, and oil-gas sectors where equipment reliability is mission-critical.

Synchronics Electronics repairs the full spectrum of Eddyfi inspection and testing equipment, including their portable eddy current flaw detectors, phased array ultrasonic systems, and automated encoded scanning units. Indian manufacturers trust Synchronics to restore Eddyfi equipment to factory specifications, minimizing production downtime and ensuring inspection accuracy.

Expert repair of Eddyfi eddy current, ultrasonic, and phased array inspection systems across India.

1
Products in Catalog
1+
Product Categories
6 Mo
Repair Warranty
32+
Years Experience

EDDYFI Equipment We Repair — By Category

Repair Expertise

EDDYFI Product Lines We Repair

Our engineers are trained on the full EDDYFI product range. Below are the major product families we service.

OmniScan Series (MX2, MX4, SX)

OmniScan MX2OmniScan MX4OmniScan SXOmniScan iX

Noliac Eddy Current Systems

High-resolution eddy current probes and gate units for surface and subsurface defect detection in conductors.

Noliac EC4, Noliac EC8MultiFreq SystemsCustom Probe Interfaces

AdvantageEC Hand-Held Units

Portable eddy current flaw detection instruments for in-service inspection of tubes, fasteners, and aerospace components. Repair challenges include display panel corrosion, battery connector oxidation, and probe signal noise in high-vibration environments.

AdvantageECAdvantageEC PlusField-Portable Variants

EMAT (Electromagnetic Acoustic Transducer) Systems

Non-contact ultrasonic testing equipment for high-temperature piping, boiler tubes, and composite structures. Common faults involve coil winding failures, coupling signal loss, and thermal sensitivity drift in extreme industrial conditions.

EMAT StandardEMAT PortableCustom Frequency Variants

Automated Scanning Systems

Motorized encoded scanning units for repeatable flaw mapping in pipelines, pressure vessels, and nuclear components. Issues include stepper motor jams, encoder belt slippage, data acquisition card failure, and software synchronization errors.

RollerScanCarriageScanCustom Encoded Rigs
Why Us

Why Choose Synchronics for EDDYFI Repairs?

🔬

PCB-Level Expertise

We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on EDDYFI equipment.

⚡

Fast Turnaround

Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.

🛡️

6-Month Warranty

Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.

📦

All-India Service

Couriered repairs accepted from any city in India — Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.

Diagnosis

Common EDDYFI Equipment Faults We Fix

Based on 30+ years of repair data, these are the most frequent failure modes we see in EDDYFI equipment arriving at our workshop.

  • ✓Phased array probe impedance mismatch — Eddyfi ultrasonic probes experience connector corrosion, internal crystal degradation, or manufacturing tolerance drift after extensive field use. This causes signal loss and inaccurate flaw sizing in critical welds.
  • ✓OmniScan encoder signal loss — Phased array systems' motorized encoders experience belt wear, pulley misalignment, or loose connectors in field-deployed units, breaking scan geometry correlation needed for accurate weld mapping.
  • ✓Display panel LCD corruption and dead pixels — Extended operation in high-vibration industrial environments or thermal shock causes LCD panel segmentation failure in Eddyfi portable units, rendering measurement readouts unreadable.
  • ✓EMAT coil winding insulation breakdown — Electromagnetic acoustic transducers used at elevated temperatures or in vibration-intense offshore platforms experience insulation degradation, shorting the high-frequency excitation coil.
  • ✓Data acquisition card failure and signal noise — Automated Eddyfi scanning rigs experience PCMCIA or USB DAQ card failure in harsh plant environments. EMI from nearby welding or power equipment introduces measurement noise.
Process

How We Repair Your EDDYFI Unit

📥
Step 1

Receive & Log

Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.

🔬
Step 2

Fault Diagnosis

Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.

🔧
Step 3

Component Repair

Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.

✅
Step 4

Full-Load Test

Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.

Sectors

Industries Using EDDYFI Equipment

We serve plant maintenance teams across all major industries where EDDYFI automation is deployed.

Aerospace and Defence ManufacturingOil and Gas Pipeline InspectionPower Generation and NuclearAutomotive Component SuppliersBoiler and Pressure Vessel FabricationShipbuilding and Marine EngineeringRailway and Mass Transit SystemsMetal Forging and Steel Mills
FAQ

Frequently Asked Questions — EDDYFI Repairs

Is Synchronics an authorised EDDYFI service centre?+

No. Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider. We are not affiliated with, authorised by, sponsored by or endorsed by EDDYFI or its group companies, and we are not an official EDDYFI service centre, dealer or representative. Brand names and model numbers are used only to identify the equipment we repair. If your equipment is under manufacturer warranty or a service contract, please contact the manufacturer first — third-party repair may affect that cover.

Do you repair Eddyfi equipment anywhere in India?+

Yes. Synchronics repairs the complete Eddyfi product range - phased array ultrasonic systems, eddy current flaw detectors, EMAT systems, and automated scanning rigs. Central repair facility in Vadodara, Gujarat ensures fast turnaround.

What is the typical repair turnaround for Eddyfi phased array systems?+

For standard faults - probe replacement, impedance matching, software resets - turnaround is 5-7 working days. Complex repairs involving coil rewinding, encoder mechanism overhaul, or board-level diagnostics may require 10-14 days. Emergency expedited service available for critical production shutdowns. We maintain Eddyfi spares inventory including probes, connectors, and LCD panels.

Do you repair Eddyfi automated scanning systems and custom-built encoder rigs?+

Yes. Synchronics specializes in motorized Eddyfi scanning platforms - RollerScan, CarriageScan, and customer-engineered encoded rigs for pipeline and vessel inspection. We repair stepper motors, optical encoders, data acquisition interfaces, and scanning software synchronization. Many Indian pipeline operators and pressure vessel builders rely on us to restore scanning accuracy and repeatability.

Can Synchronics repair Eddyfi equipment with water damage or field contamination?+

Yes. We perform deep cleaning, corrosion remediation, and board-level restoration for Eddyfi systems exposed to moisture, saltwater spray (offshore), or industrial coolant contamination. Connectors are cleaned and re-plated, PCBs are cleaned and inspected, and all circuits are retested. Equipment emerges ready for harsh field deployment.

How do I send my EDDYFI unit for repair?+

Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt.

What is the cost of repairing a EDDYFI drive or PLC?+

Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.

What warranty do you provide on EDDYFI repairs?+

All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.

Do you provide a no-fix, no-fee guarantee?+

Yes. For standard units, evaluation is free and included in the repair cost — if we cannot repair your EDDYFI unit, no repair charge is raised. A physical inspection charge applies only if the unit has already been subjected to a third-party repair attempt, and we tell you before we start.

EDDYFI Repair Catalog

Showing 1–1 of 1 EDDYFI products

32+
Years in Business
80,000+
Units Repaired
150+
Workstations
4.8★
682 Reviews

Disclaimer

EDDYFI and all associated product names and model numbers are trademarks of their respective owner(s). Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider and is not affiliated with, authorised by, sponsored by or endorsed by EDDYFI. Product names and model numbers are used solely to identify the equipment on which repair services are offered, and no trademark ownership is claimed or implied.

Trusted Since 1994 · ISO Certified · 32+ Years

Get Your Equipment
Back in Action — Fast

Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.

✓

Free Evaluation

No obligation

⚡

48hr Turnaround

Fastest in India

🛡

6-Month Warranty

Every repair

₹

No Fix, No Charge

Zero risk policy

📦

Pan-India Service

Ship from anywhere