EPIS Repair Services India
EPIS is an Italian specialist manufacturer of industrial automation, control systems, and precision electronic components for demanding manufacturing environments. Founded in 1983, EPIS has built a reputation for reliable, compact control solutions used across European and increasingly Indian industrial sectors. Their product portfolio focuses on modular electronics, industrial controllers, and automation interfaces designed for harsh factory conditions and high-performance applications.
EPIS is an Italian specialist manufacturer of industrial automation, control systems, and precision electronic components for demanding manufacturing environments. Founded in 1983, EPIS has built a reputation for reliable, compact control solutions used across European and increasingly Indian industrial sectors. Their product portfolio focuses on modular electronics, industrial controllers, and automation interfaces designed for harsh factory conditions and high-performance applications.
Synchronics Electronics repairs the full spectrum of EPIS industrial control equipment, including their proprietary modular controllers, interface modules, and automation electronics. Our 180+ engineers have extensive experience diagnosing EPIS firmware issues, component-level failures, and integration faults. Indian manufacturing plants trust Synchronics for rapid EPIS repairs because we understand both the technical design and the critical role these systems play in production uptime.
Synchronics specializes in EPIS modular controller and automation electronics repair across India.
EPIS Product Lines We Repair
Our engineers are trained on the full EPIS product range. Below are the major product families we service.
EPIS Modular Controller Systems
Compact, stackable industrial controllers designed for distributed automation. Common issues include firmware corruption, I/O module failures, communication bus faults, and relay contact degradation. Industrial plants often experience unexpected controller lockups or loss of sensor input.
EPIS Interface & Gateway Modules
Converts legacy industrial protocols (20mA, 4-20mA, discrete signals) to modern fieldbus standards. Typical faults include signal isolation failures, protocol conversion errors, and connector oxidation causing intermittent communication dropout.
EPIS Analog Input/Output Cards
High-precision signal conditioning modules for process control and instrumentation. Repair issues often involve ADC drift, DAC linearity errors, input amplifier failures, and software calibration loss due to EEPROM degradation.
EPIS Relay & Discrete Output Modules
Solid-state and electromechanical relay drivers for motor control and switchgear interfacing. Common faults include relay contact welding, driver MOSFET shorts, trigger circuit failures, and surge suppression component burnout.
EPIS Communication & Networking Boards
RS-485, RS-232, Ethernet, and proprietary serial interface modules for system integration. Typical repair demands stem from network isolation failures, transceiver IC damage, impedance matching faults, and software handshake protocol errors.
Why Choose Synchronics for EPIS Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on EPIS equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common EPIS Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in EPIS equipment arriving at our workshop.
- ✓EPIS Controller Firmware Corruption & Boot Failure — Sudden power loss, supply voltage spikes, or corrupted firmware update during programming can corrupt the flash memory in EPIS MC-series controllers, preventing normal boot sequence and device initialization.
- ✓EPIS I/O Module Signal Loss on Specific Channels — Input amplifier IC failure, broken PCB traces from thermal cycling, or connector pin oxidation in harsh dusty Indian factory environments cause intermittent or complete signal loss on individual I/O channels.
- ✓EPIS Gateway Protocol Conversion Timeout Errors — Corrupted protocol stack firmware, timing calibration drift, or transceiver IC malfunction in IGM gateway modules cause timeout errors and failed message conversion between legacy and modern fieldbus standards.
- ✓EPIS Relay Module Stuck Contact & No Output — Relay coil open circuit, driver transistor failure, or welded relay contacts due to inductive surge prevent relay energization or keep outputs permanently on, disrupting machine safety interlocks.
- ✓EPIS Analog Card ADC Accuracy Drift & Calibration Loss — Reference voltage IC aging, ADC non-linearity, or loss of stored calibration coefficients in EEPROM cause measurement errors of 2-5% or more, disrupting process control loops and product quality.
- ✓EPIS Communication Board Isolation Failure & Ground Loop Noise — Damaged optical or capacitive isolation circuits in COM-485 and COM-ETH modules, combined with inadequate site grounding, introduce ground loop noise and data corruption on long cable runs typical in Indian multi-building manufacturing plants.
How We Repair Your EPIS Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using EPIS Equipment
We serve plant maintenance teams across all major industries where EPIS automation is deployed.
Frequently Asked Questions — EPIS Repairs
Do you repair EPIS equipment anywhere in India?+
Yes. Synchronics repairs the full EPIS product range — modular controllers, interface modules, analog cards, relay drivers, and communication boards. We offer PAN India door pickup from Mumbai, Delhi, Pune, Bangalore, Chennai, Hyderabad, Ahmedabad, Surat, Jaipur, and all other major industrial cities. All repairs are processed in our Vadodara, Gujarat facility with a 7-14 day turnaround for most faults.
Can you repair EPIS MC-series controllers with lost or corrupted firmware?+
Absolutely. EPIS firmware corruption is common after power surges or failed programming attempts. Synchronics has proprietary access to EPIS firmware dumps and recovery procedures. We extract the existing firmware, identify corruption points, restore factory code or apply customer backups, and validate the boot sequence. Even controllers that won't power up normally can usually be recovered.
What is your experience repairing EPIS gateway modules for protocol conversion?+
EPIS gateway modules (IGM and GW series) are critical for integrating legacy equipment with modern SCADA systems in Indian plants. Our engineers have repaired hundreds of protocol conversion failures — RS-485 to Ethernet bridges, Modbus to proprietary protocol conversions, and CAN gateway faults. We test all message conversion paths and verify timing parameters to ensure zero data loss in production environments.
How do I know if my EPIS analog card needs repair or just recalibration?+
EPIS analog cards often display measurement errors due to calibration drift rather than component failure. Symptoms include consistent 1-3% output error across all channels, or loss of stored calibration data after power cycles. Synchronics performs free diagnostic testing to determine if the card needs full recalibration, EEPROM restoration, or component replacement. We provide detailed accuracy reports before and after repair.
Do you stock EPIS spare parts, or must I source components separately?+
Synchronics stocks common EPIS replacement components including relays, isolation ICs, transceiver chips, and capacitor assemblies. For specialized EPIS proprietary modules or rare interface cards, we often repair existing boards to original specification rather than replace them — this is usually faster and more cost-effective for Indian manufacturers. Contact our engineers with your specific component needs for availability and timeline.
How do I send my EPIS unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a EPIS drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on EPIS repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your EPIS unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
EPIS Repair Catalog
No products found for EPIS
Don't See Your EPIS Model Listed?
We repair the full range of EPIS industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.
Free evaluation • 6-month warranty • PAN India pickup
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service