EPL Repair Services India
EPL (Electrical Power Limited) is a UK-based manufacturer specialising in electrical distribution, power control, and industrial automation equipment. With nearly 80 years of heritage, EPL has built a strong reputation for rugged, reliable switchgear and control systems across European and Asian markets. EPL equipment is widely deployed in Indian manufacturing, infrastructure, and utilities sectors where durability and precision are non-negotiable.
EPL (Electrical Power Limited) is a UK-based manufacturer specialising in electrical distribution, power control, and industrial automation equipment. With nearly 80 years of heritage, EPL has built a strong reputation for rugged, reliable switchgear and control systems across European and Asian markets. EPL equipment is widely deployed in Indian manufacturing, infrastructure, and utilities sectors where durability and precision are non-negotiable.
Synchronics Electronics repairs the full spectrum of EPL industrial control and distribution equipment — from switchgear and soft starters to control panels and automation modules. Our 180+ engineers have deep familiarity with EPL's design architecture and fault patterns. We've earned the trust of plant managers across India's auto, textile, cement, and power sectors for fast, expert EPL repairs with genuine component replacement.
Expert repair of EPL switchgear, soft starters, control systems, and distribution panels across India.
EPL Product Lines We Repair
Our engineers are trained on the full EPL product range. Below are the major product families we service.
EPL Soft Starter Range
Soft starter units designed for motor acceleration control and energy efficiency. Common faults include thyristor failures, heat sink degradation, and control circuit board damage due to thermal stress in high-ambient industrial environments.
EPL Distribution Switchgear
Medium and low-voltage switchgear for industrial power distribution. Typical repair issues involve contact erosion, trip mechanism failure, and insulation degradation in moisture-prone factory environments.
EPL Control Panel Modules
Modular control and contactor assemblies for machinery and process automation. Failures include relay coil burns, contactor welding, and PCB-mounted component degradation in high-vibration settings.
EPL Power Factor Correction Units
Capacitor banks and reactive power control systems for industrial power optimization. Common faults involve capacitor bulging, thyristor short circuits, and harmonic filter inductor saturation.
EPL Automation and Safety Modules
Safety relays, timers, and control interface modules for machine protection and process sequencing. Typical issues include relay contact failures, timer circuit faults, and isolation transformer breakdown.
Why Choose Synchronics for EPL Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on EPL equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common EPL Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in EPL equipment arriving at our workshop.
- ✓Soft starter thyristor short-circuit or open-circuit — EPL soft starters operate in harsh industrial environments with high inrush currents and thermal cycling. Thyristor gates fail due to gate drive circuit aging, excessive dV/dt spikes, or inadequate heatsinking in dusty factory floors. Moisture ingress accelerates gate oxide degradation.
- ✓Distribution switchgear contact welding or pitting — EPL switchgear contacts deteriorate rapidly in high-current, high-switching-frequency applications. Arc erosion and oxidation are accelerated by humidity, industrial dust, and poor ventilation common in Indian textile mills, foundries, and cement plants.
- ✓Control panel relay coil burn or contactor sticking — EPL control relays and contactors in automated machinery experience contact bounce, weld initiation, and coil insulation breakdown. High-vibration environments in stamping shops, textile looms, and packaging lines accelerate mechanical wear. Harmonic-rich electrical environments degrade coil windings.
- ✓Power factor correction capacitor bulging or leakage current rise — EPL PFC capacitors fail under sustained high reactive power loads and elevated ambient temperatures (40-50°C common in Indian summers). Dielectric breakdown and electrolyte evaporation are exacerbated by inadequate ventilation and poor electrical design of customer panels.
- ✓Soft starter or switchgear PCB component failure (solder joints, capacitors, diodes) — EPL electronics experience thermal cycling extremes from 10°C winter lows to 55°C summer highs. Solder joint fatigue, electrolytic capacitor dry-out, and diode leakage accelerate in high-humidity coastal and monsoon-prone Indian regions. Vibration loosens through-hole components.
- ✓Safety relay or timer module no response or erratic operation — EPL safety modules experience input signal loss due to connector corrosion, wiring faults, and isolation transformer insulation breakdown. Relay contact contamination and aging reduce switching reliability. Humidity causes logic circuit intermittent faults.
How We Repair Your EPL Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using EPL Equipment
We serve plant maintenance teams across all major industries where EPL automation is deployed.
Frequently Asked Questions — EPL Repairs
Do you repair EPL equipment anywhere in India?+
Yes, absolutely. Synchronics repairs the full EPL product range — soft starters, distribution switchgear, control modules, PFC units, and safety relays. We offer PAN India doorstep pickup from major metros: Mumbai, Delhi, Bangalore, Chennai, Hyderabad, Pune, Ahmedabad, Jaipur, Kolkata, and 100+ tier-2 cities. All repairs are performed in our state-of-the-art facility in Vadodara, Gujarat, and returned with a 1-year workmanship warranty.
What is the typical turnaround time for EPL soft starter repair?+
EPL soft starter repairs typically take 5-7 working days depending on component availability and extent of damage. Thyristor stack replacement, gate drive board refurbishment, and thermal cycling tests are standard. Synchronics maintains stock of common EPL spare thyristors, heatsinks, and control boards to minimize delays. Express turnaround (3 days) is available for mission-critical equipment — contact our service desk for urgent requests.
Can Synchronics repair EPL switchgear that has suffered contact welding or arc damage?+
Yes, we specialise in repairing severely damaged EPL switchgear. Contact arc erosion, welding, and pitting are fully repairable through contact assembly replacement and mechanical mechanism recalibration. We source genuine EPL or certified equivalent contacts rated for the original current and voltage. Full load-testing and insulation diagnostics are performed to restore the switchgear to factory-safe condition.
Do you repair EPL control panels and PLC interface modules, or just drives?+
Synchronics repairs the complete EPL automation ecosystem — not just drives. We service control panels, relay modules, safety interlocks, timer circuits, isolation transformers, connector assemblies, and PCB-level components. Our engineers reverse-engineer circuit diagrams and perform component-level diagnostics for obsolete or undocumented EPL modules — common in Indian plants running 15-20 year old machinery.
What diagnostic testing does Synchronics perform on repaired EPL equipment before dispatch?+
Post-repair, every EPL unit undergoes comprehensive functional testing: electrical load simulation, thermal imaging during operation, insulation resistance measurement (megohm testing), harmonic spectrum analysis (for PFC units), timing accuracy verification (for safety modules), and 24-48 hour burn-in at elevated ambient temperature (45°C). Full test reports are provided with your invoice for compliance and warranty purposes.
How do I send my EPL unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a EPL drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on EPL repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your EPL unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
EPL Repair Catalog
No products found for EPL
Don't See Your EPL Model Listed?
We repair the full range of EPL industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.
Free evaluation • 6-month warranty • PAN India pickup
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service