GALLANT Repair Services India
Gallant is a Taiwan-based manufacturer specialising in industrial automation control systems, motion controllers, and servo drives for precision manufacturing. Known for compact, reliable designs, Gallant equipment powers textile machinery, packaging lines, and precision assembly systems across Asia and increasingly in Indian manufacturing plants seeking cost-effective automation upgrades.
Gallant is a Taiwan-based manufacturer specialising in industrial automation control systems, motion controllers, and servo drives for precision manufacturing. Known for compact, reliable designs, Gallant equipment powers textile machinery, packaging lines, and precision assembly systems across Asia and increasingly in Indian manufacturing plants seeking cost-effective automation upgrades.
Synchronics repairs the complete Gallant industrial electronics product range including servo drives, motion controllers, stepper motor drivers, and industrial networking modules. Our 180+ engineers have extensive hands-on experience with Gallant's proprietary control architectures and firmware, offering rapid diagnostics and field-proven repair solutions for manufacturers across India's textile, packaging, and precision engineering sectors.
Expert Gallant servo drive and motion controller repair across India since 1994.
GALLANT Product Lines We Repair
Our engineers are trained on the full GALLANT product range. Below are the major product families we service.
Gallant Servo Drive Series (GSA/GSM)
Closed-loop servo drives for precision positioning in textile machinery and packaging equipment. Common faults include encoder communication loss, phase detection errors, and thermal shutdown due to cooling fin blockage in high-humidity Indian manufacturing environments.
Gallant Motion Controller (GMC/GMP)
Gallant Stepper Driver (GSD Series)
Microstepping drivers for textile looms, embroidery machines, and light assembly automation. Typical failures: phase winding short circuits, enable signal logic faults, and PCB corrosion from moisture in uncontrolled plant environments.
Gallant Industrial Ethernet Gateway (GEW Series)
Protocol converters bridging legacy serial industrial equipment to modern Ethernet networks. Common issues: IP configuration loss, port firmware outdated, and Modbus/TCP timeout errors affecting real-time plant monitoring.
Gallant Compact PLC (GCP Series)
Programmable logic controllers for small-to-medium automation tasks in Indian SMEs. Repair challenges: RAM memory corruption, I/O module contact degradation, and RTC battery depletion causing lost schedules.
Why Choose Synchronics for GALLANT Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on GALLANT equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India — Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common GALLANT Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in GALLANT equipment arriving at our workshop.
- ✓Servo drive phase A/B/C short circuit — Moisture ingress combined with thermal stress in India's tropical climate causes winding insulation breakdown, especially in coastal and humid regions. Power transients during grid fluctuations accelerate failure.
- ✓Encoder communication timeout (E001 error) — Gallant servo systems use proprietary encoder handshake protocols. Loose ABZ cable connectors, corroded shield braid, or firmware version mismatch between drive and encoder cause signal loss during machine acceleration.
- ✓Stepper driver enable signal not responding (GSD Series) — Gallant GSD drivers use opto-isolated enable inputs. Plant vibration, loose panel-mounted connectors, or 24VDC supply dropout cause intermittent enable logic faults affecting machine startups.
- ✓Industrial Ethernet gateway port unresponsive (GEW Series) — Inadequate RJ45 shielding in noisy Indian manufacturing floors causes CRC errors and connection drops. Firmware outdated or corrupted during failed update attempts locks gateway into safe mode.
- ✓Compact PLC memory error or program loss (GCP Series) — Gallant GCP units store ladder logic in battery-backed SRAM. Weak coin-cell RTC batteries (typical 3-5 year life) combined with power cuts cause memory loss. Surge voltage spikes corrupt flash sectors.
How We Repair Your GALLANT Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using GALLANT Equipment
We serve plant maintenance teams across all major industries where GALLANT automation is deployed.
Frequently Asked Questions — GALLANT Repairs
Is Synchronics an authorised GALLANT service centre?+
No. Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider. We are not affiliated with, authorised by, sponsored by or endorsed by GALLANT or its group companies, and we are not an official GALLANT service centre, dealer or representative. Brand names and model numbers are used only to identify the equipment we repair. If your equipment is under manufacturer warranty or a service contract, please contact the manufacturer first — third-party repair may affect that cover.
Do you repair Gallant equipment anywhere in India?+
Yes. Synchronics repairs the full Gallant product range - servo drives, motion controllers, stepper drivers, Ethernet gateways, and compact PLCs. Typical turnaround is 5-7 working days.
What is the typical cost and lead time for Gallant servo drive repair?+
We provide transparent quotes upfront with no hidden charges. Express repair (3-day turnaround) is available for time-critical production environments at 30% premium.
Is Gallant equipment still supported by the manufacturer in India?+
Gallant maintains limited direct support in India. Most Indian importers source through regional distributors in Singapore or Hong Kong, which extends lead times significantly. We maintain stock of common Gallant replacement boards and connectors for faster turnaround.
How do I send my GALLANT unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt.
What is the cost of repairing a GALLANT drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on GALLANT repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. For standard units, evaluation is free and included in the repair cost — if we cannot repair your GALLANT unit, no repair charge is raised. A physical inspection charge applies only if the unit has already been subjected to a third-party repair attempt, and we tell you before we start.
GALLANT Repair Catalog
No products found for GALLANT
Don't See Your GALLANT Model Listed?
We repair the full range of GALLANT industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.
Free evaluation • 6-month warranty • Pan-India service
Disclaimer
GALLANT and all associated product names and model numbers are trademarks of their respective owner(s). Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider and is not affiliated with, authorised by, sponsored by or endorsed by GALLANT. Product names and model numbers are used solely to identify the equipment on which repair services are offered, and no trademark ownership is claimed or implied.
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Service
Ship from anywhere