Skip to main content
OPEN NOW
0s

0% of today's working hours elapsed

Office Hours (IST)

Track Repair →
0 Products

GEORGIN Repair Services India

GEORGIN is a French manufacturer of precision instrumentation, control systems, and pressure/temperature measurement solutions for industrial automation. Founded in 1963, GEORGIN specializes in analog and digital controllers, pressure transmitters, and industrial sensors widely deployed across European and Indian manufacturing plants. Their robust, field-proven equipment is trusted in refineries, chemical plants, food processing, and power generation across India.

GEORGIN is a French manufacturer of precision instrumentation, control systems, and pressure/temperature measurement solutions for industrial automation. Founded in 1963, GEORGIN specializes in analog and digital controllers, pressure transmitters, and industrial sensors widely deployed across European and Indian manufacturing plants. Their robust, field-proven equipment is trusted in refineries, chemical plants, food processing, and power generation across India.

Synchronics Electronics repairs the complete GEORGIN industrial electronics range, including analog controllers, digital recorders, pressure and temperature transmitters, and instrumentation interfaces. Our Vadodara facility stocks genuine GEORGIN components and offers same-day turnaround for critical equipment.

0
Products in Catalog
0+
Product Categories
6 Mo
Repair Warranty
32+
Years Experience
Repair Expertise

GEORGIN Product Lines We Repair

Our engineers are trained on the full GEORGIN product range. Below are the major product families we service.

GEORGIN Analog Controllers

Analog control modules for temperature, pressure, and process regulation. Common issues include drift in analog signal conditioning, relay contact failure, and capacitor aging in power conditioning circuits leading to signal noise.

ART-12ART-14RCD-14RCD-12ART-20

GEORGIN Digital Recorders and Loggers

Multi-channel digital recording systems for process data logging and monitoring. Faults include SD card interface failures, LCD display degradation, power supply issues, and data corruption due to battery backup failure.

DL-4100DL-3100REC-8SREC-12SDLOG-2100

GEORGIN Pressure Transmitters

4-20mA and 0-10V pressure measurement devices used in oil, gas, and chemical sectors. Typical failures are diaphragm seal degradation, signal isolation transformer burnout, connector corrosion, and 4-20mA loop current loss.

PT-4/20PT-0/10DPT-201DPT-301PT-HART

GEORGIN Temperature Controllers

RTD and thermocouple-based temperature measurement and control. Common faults include thermocouple cold junction compensation drift, PID tuning instability, relay hysteresis failure, and sensor interface module breakdown.

TRC-12TRC-14TCD-20TCD-30TEMP-LOG

GEORGIN Instrumentation Modules

Signal conditioning and conversion modules (4-20mA to 0-10V, isolation, amplification). Failures stem from operational amplifier failure, precision resistor drift, isolation barrier breakdown, and connector pin corrosion.

ISM-100ISM-200AMP-4/20ISO-24COND-1

GEORGIN Process Interface Units

Communication modules for connecting GEORGIN controllers to industrial networks and SCADA systems. Issues include RS-485 transceiver failure, Modbus protocol stack corruption, surge damage, and power conditioning collapse.

PIU-232PIU-485PIU-MODGW-SCADANET-INT
Why Us

Why Choose Synchronics for GEORGIN Repairs?

🔬

PCB-Level Expertise

We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on GEORGIN equipment.

⚡

Fast Turnaround

Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.

🛡️

6-Month Warranty

Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.

📦

All-India Service

Couriered repairs accepted from any city in India — Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.

Diagnosis

Common GEORGIN Equipment Faults We Fix

Based on 30+ years of repair data, these are the most frequent failure modes we see in GEORGIN equipment arriving at our workshop.

  • ✓Analog output signal drift or nonlinearity — GEORGIN analog controllers suffer precision degradation due to aging film capacitors in the signal conditioning path, temperature coefficient drift in precision resistor networks, and operational amplifier offset voltage creep over years of operation in harsh Indian plant environments.
  • ✓Relay contact chatter or failure to switch load — GEORGIN controller relay outputs fail due to contact bounce, arc erosion from inductive load switching (especially in pump and motor circuits), and solder joint cracks at the relay socket from thermal cycling in uncontrolled plant environments.
  • ✓Pressure transmitter zero offset or reading instability — GEORGIN pressure transmitters experience diaphragm seal degradation allowing process fluid or condensation into the sensor cavity, resulting in zero shift and noise. Power supply ripple and ground loop current also cause 4-20mA loop instability in multi-node installations.
  • ✓Temperature controller oscillation or runaway — GEORGIN temperature controllers enter PID control loop instability when RTD/thermocouple sensor breaks, when cold junction compensation fails due to capacitor aging, or when the integral (I) and derivative (D) tuning constants drift due to firmware corruption or eeprom degradation.
  • ✓Data logger SD card read/write errors or file corruption — GEORGIN digital recorders fail to log data when the SD card interface controller transistors fail due to ESD damage, when the card detect switch corrodes, or when the power supply for the card interface drops below minimum voltage during peak write cycles.
  • ✓No communication or Modbus timeout errors — GEORGIN network interface modules fail when RS-485 differential line transceivers burn out from surge transients (common in Indian plants with lightning strikes and grid disturbances), when Modbus stack firmware becomes corrupted, or when the isolated power supply for the interface fails.
Process

How We Repair Your GEORGIN Unit

📥
Step 1

Receive & Log

Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.

🔬
Step 2

Fault Diagnosis

Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.

🔧
Step 3

Component Repair

Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.

✅
Step 4

Full-Load Test

Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.

Sectors

Industries Using GEORGIN Equipment

We serve plant maintenance teams across all major industries where GEORGIN automation is deployed.

Oil and Gas RefiningPetrochemical ProcessingPharmaceutical ManufacturingFood and Beverage ProcessingPulp and Paper MillsThermal Power GenerationWater Treatment and DesalinationChemical Manufacturing
FAQ

Frequently Asked Questions — GEORGIN Repairs

Is Synchronics an authorised GEORGIN service centre?+

No. Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider. We are not affiliated with, authorised by, sponsored by or endorsed by GEORGIN or its group companies, and we are not an official GEORGIN service centre, dealer or representative. Brand names and model numbers are used only to identify the equipment we repair. If your equipment is under manufacturer warranty or a service contract, please contact the manufacturer first — third-party repair may affect that cover.

Do you repair GEORGIN equipment anywhere in India?+

Yes. Synchronics repairs the full GEORGIN product range including analog controllers, digital recorders, pressure transmitters, temperature controllers, and instrumentation modules. All repairs are handled at our fully equipped facility in Vadodara, Gujarat with 24-72 hour turnaround for non-critical faults and 48-96 hours for component rebuilds.

My GEORGIN temperature controller is oscillating. What is the repair cost and timeline?+

Temperature controller oscillation in GEORGIN units typically stems from PID tuning drift, cold junction compensation failure, or RTD sensor degradation. Synchronics diagnoses the root cause (usually 2-4 hours), replaces failed components like compensation capacitors or sensor interface modules (1-2 days), re-tunes the PID loop per GEORGIN commissioning specs, and test-runs under simulated load. We provide a 1-year warranty on all repairs.

Do you stock genuine GEORGIN spare parts or use third-party equivalents?+

Synchronics maintains inventory of genuine GEORGIN components including relays, capacitors, transducers, and communication modules. We do not use third-party substitutes for safety-critical or precision components; all replacements are original-specification only. This ensures your repaired equipment performs to original GEORGIN standards and qualifies for customer compliance and certification requirements.

How do I send my GEORGIN unit for repair?+

Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt.

What is the cost of repairing a GEORGIN drive or PLC?+

Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.

What warranty do you provide on GEORGIN repairs?+

All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.

Do you provide a no-fix, no-fee guarantee?+

Yes. For standard units, evaluation is free and included in the repair cost — if we cannot repair your GEORGIN unit, no repair charge is raised. A physical inspection charge applies only if the unit has already been subjected to a third-party repair attempt, and we tell you before we start.

GEORGIN Repair Catalog

No products found for GEORGIN

🔧

Don't See Your GEORGIN Model Listed?

We repair the full range of GEORGIN industrial electronics — even if the specific model is not yet in our catalog. Send us the unit details and we'll confirm repairability within 24 hours.

Free evaluation • 6-month warranty • Pan-India service

32+
Years in Business
80,000+
Units Repaired
150+
Workstations
4.8★
682 Reviews

Disclaimer

GEORGIN and all associated product names and model numbers are trademarks of their respective owner(s). Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider and is not affiliated with, authorised by, sponsored by or endorsed by GEORGIN. Product names and model numbers are used solely to identify the equipment on which repair services are offered, and no trademark ownership is claimed or implied.

Trusted Since 1994 · ISO Certified · 32+ Years

Get Your Equipment
Back in Action — Fast

Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.

✓

Free Evaluation

No obligation

⚡

48hr Turnaround

Fastest in India

🛡

6-Month Warranty

Every repair

₹

No Fix, No Charge

Zero risk policy

📦

Pan-India Service

Ship from anywhere