GSOLA Repair Services India
GSOLA specializes in solar photovoltaic (PV) inverters, charge controllers, and energy management systems designed for industrial and commercial applications across Asia. The company has built a strong reputation in India's renewable energy sector, supplying hybrid inverters, MPPT controllers, and battery management systems to manufacturing plants, textile mills, and data centers seeking grid-independent power solutions.
GSOLA specializes in solar photovoltaic (PV) inverters, charge controllers, and energy management systems designed for industrial and commercial applications across Asia. The company has built a strong reputation in India's renewable energy sector, supplying hybrid inverters, MPPT controllers, and battery management systems to manufacturing plants, textile mills, and data centers seeking grid-independent power solutions.
Synchronics repairs the complete GSOLA solar electronics range, including hybrid inverters and MPPT charge controllers used in mission-critical industrial backup power systems. Our 180+ engineers understand GSOLA's firmware, battery synchronization protocols, and DC-AC conversion circuitry. We deliver fast turnaround repairs for plants across Gujarat, Maharashtra, Tamil Nadu, and Telangana that depend on GSOLA systems for continuous uptime.
Expert GSOLA hybrid inverter and solar charge controller repair across India.
GSOLA Equipment We Repair — By Category
GSOLA Product Lines We Repair
Our engineers are trained on the full GSOLA product range. Below are the major product families we service.
GSOLA Hybrid Inverter Series
Three-phase and single-phase hybrid inverters for industrial solar-battery-grid systems. Common faults include battery synchronization loss, AC voltage regulation drift, grid-tie relay failures, and firmware corruption during firmware updates or power surges.
GSOLA MPPT Solar Charge Controllers
Maximum Power Point Tracking controllers for rooftop and large-scale solar arrays feeding battery banks. Repair issues include MPPT algorithm failures causing low array charging current, LCD display blackouts, temperature sensor faults, and CAN-bus communication breakdowns.
GSOLA Battery Management Modules
Intelligent BMS units for lithium and lead-acid battery packs integrated with GSOLA inverters. Common problems are cell voltage imbalance detection errors, over-temperature shutdown loops, SOC (state-of-charge) algorithm drift, and RS485 communication timeouts.
GSOLA Grid-Tie Inverter Modules
Single and three-phase grid-feed inverters for solar plants exporting power to the grid. Frequent repair scenarios include phase-lock-loop (PLL) instability, grid frequency synchronization errors, anti-islanding relay malfunctions, and DC input overvoltage shutdowns.
GSOLA HMI Touch Panel and Monitoring Units
Color LCD remote monitoring panels for GSOLA inverter supervision and system diagnostics. Failure modes include touch-screen unresponsiveness, Modbus RTU communication loss with main inverter, firmware crashes, and connector corrosion.
GSOLA DC-DC Boost Converters
Step-up DC-DC converters for battery-to-inverter voltage adaptation and solar array voltage leveling. Repair work involves MOSFET/IGBT failures, PWM signal loss, output voltage regulation faults, and thermal sensor malfunction.
Why Choose Synchronics for GSOLA Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on GSOLA equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common GSOLA Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in GSOLA equipment arriving at our workshop.
- ✓Hybrid inverter battery synchronization failure — GSOLA hybrid inverters lose phase synchronization with battery DC bus due to corrupted firmware in the battery management module or failed battery voltage sense circuitry. This typically occurs after power surges or incomplete firmware flashing.
- ✓MPPT charge controller low array current output — GSOLA MPPT controllers fail to track the maximum power point when solar irradiance changes rapidly, resulting in 30-60 percent power loss. Root causes include corrupted MPPT algorithm firmware, failed temperature compensation sensor, or DC input filter capacitor degradation.
- ✓Inverter AC output voltage regulation drift — GSOLA inverters output unsteady 220V-240V AC voltage (±15 percent) due to voltage feedback circuit aging, PWM control IC malfunction, or output filter inductor saturation from harmonic loads like CNC machines and VFDs.
- ✓Battery BMS over-temperature shutdown loops — GSOLA battery management modules trigger repeated over-temperature shutdowns even when ambient temperature is normal, caused by stuck NTC thermistor faults, comparator IC failures, or software threshold miscalibration from previous failed firmware updates.
- ✓Grid-tie inverter anti-islanding relay dropout — GSOLA grid-tie inverters fail to disconnect during grid outages because the anti-islanding relay is stuck or the relay driver circuit has aged electrolytic capacitors causing insufficient drive voltage to the relay coil.
- ✓HMI touch panel Modbus communication timeout — GSOLA remote monitoring panels lose communication with main inverter due to corroded RS485 connectors, failed termination resistors in the Modbus network, or corrupted Modbus RTU protocol firmware in the panel microcontroller.
How We Repair Your GSOLA Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using GSOLA Equipment
We serve plant maintenance teams across all major industries where GSOLA automation is deployed.
Frequently Asked Questions — GSOLA Repairs
Do you repair GSOLA equipment anywhere in India?+
Yes. Synchronics repairs the full GSOLA product range — hybrid inverters, MPPT charge controllers, battery management modules, grid-tie inverters, HMI panels, and DC-DC converters. We offer PAN India door pickup from Mumbai, Delhi, Pune, Chennai, Hyderabad, Bangalore, Ahmedabad, Surat, and all other metros. All work is done at our advanced facility in Vadodara, Gujarat, with 3-7 day turnaround for most GSOLA repairs.
What is typical turnaround time for GSOLA hybrid inverter repair?+
GSOLA hybrid inverter repairs typically take 5-7 days including diagnostic testing, component replacement, firmware reprogramming, and battery simulation testing. Urgent repairs can be expedited to 2-3 days if parts are in stock. We use genuine GSOLA components wherever possible and source compatible industrial-grade equivalents for obsolete parts.
Can you repair GSOLA MPPT controllers that are out of warranty?+
Absolutely. Synchronics specializes in out-of-warranty GSOLA repairs across all product families. We reverse-engineer firmware, replace aged capacitors, and restore full functionality at 60-70 percent of new replacement cost. This is especially valuable for textile mills and manufacturing plants with aging solar installations that cannot afford downtime waiting for new units.
Does Synchronics stock spare parts for GSOLA equipment?+
Yes. We maintain stock of common GSOLA spare parts including electrolytic capacitors (400V 2200uF for inverter output filters), MPPT sensor modules, battery management ICs, relay drivers, and Modbus communication boards. Critical parts like IGBTs and power transformers are sourced within 3-5 days from our supplier network.
How do I know if my GSOLA inverter has a firmware issue vs. hardware failure?+
Synchronics runs diagnostic firmware tests that check all internal registers, communication buses, and sensor inputs. If the inverter responds to Modbus commands but shows abnormal voltage/current readings, it is usually firmware-related. If there is no response at all, hardware failure is likely. Email your GSOLA error code and model number to our technical team and we provide a free preliminary diagnosis within 24 hours.
How do I send my GSOLA unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a GSOLA drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on GSOLA repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your GSOLA unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
GSOLA Repair Catalog
Showing 1–2 of 2 GSOLA products
Other Brands We Repair in the Same Categories
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service