Skip to main content
OPEN NOW
0s

0% of today's working hours elapsed

Office Hours (IST)

Track Repair →
40 Products

LARSEN & TOUBRO Repair Services India

Larsen & Toubro (L&T) is India's largest conglomerate in engineering, manufacturing, and construction. Founded in 1938, L&T designs and manufactures critical industrial equipment including electrical systems, automation controls, power distribution units, and process automation solutions. With presence across 30+ countries, L&T equipment is the backbone of Indian manufacturing, infrastructure, and power sectors. Their industrial electronics and control systems are trusted by Fortune 500 companies and government enterprises across India.

Larsen & Toubro (L&T) is India's largest conglomerate in engineering, manufacturing, and construction. Founded in 1938, L&T designs and manufactures critical industrial equipment including electrical systems, automation controls, power distribution units, and process automation solutions. With presence across 30+ countries, L&T equipment is the backbone of Indian manufacturing, infrastructure, and power sectors. Their industrial electronics and control systems are trusted by Fortune 500 companies and government enterprises across India.

Synchronics Electronics specializes in repairing 39+ Larsen & Toubro product lines including low-voltage distribution panels, soft starters, AC drives, PLC modules, automation controllers, and integrated electrical systems. With 25+ years' experience and 180+ engineers, we understand L&T's engineering standards and quality requirements. Our Vadodara facility is equipped to handle complex L&T system diagnostics, PCB-level repairs, and firmware reprogramming.

40
Products in Catalog
9+
Product Categories
6 Mo
Repair Warranty
32+
Years Experience
Repair Expertise

LARSEN & TOUBRO Product Lines We Repair

Our engineers are trained on the full LARSEN & TOUBRO product range. Below are the major product families we service.

L&T Soft Starters and AC Drives

L&T soft starters reduce inrush current in motor startups, preventing voltage dips in Indian industrial grids. Common issues include thyristor faults, control card failures, and overheating. Synchronics repairs heat sink damage, rectifier module burnout, and firmware corruption specific to L&T drive architectures.

STX SeriesSL SeriesStarline Soft StartersL&T AC DrivesTENORM Series

L&T Low-Voltage Distribution Systems (LVDS)

L&T LVDS distributes and controls power in manufacturing plants, refineries, and chemical facilities. Faults include contactor burn-out, thermal relay tripping, bus bar corrosion, and PLC interface failures. Synchronics handles panel rewiring, component replacement, and testing under actual industrial load conditions.

L&T Main Switch BoardsL&T Distribution BoardsL&T Power Control UnitsLVDS Automation Panels

L&T Programmable Logic Controllers (PLCs)

L&T PLC modules control sequential machinery operations in textile mills, steel plants, and pharmaceutical manufacturing. Repair issues involve digital input/output card failures, analog module drift, communication port corruption, and program memory loss.

L&T PLC SeriesL&T Analog I/O ModulesL&T Communication CardsAutomation Control Modules

L&T Human-Machine Interfaces (HMIs) and Touchscreens

L&T HMI panels provide operator control and real-time monitoring for production lines and utilities. Synchronics performs display replacement, firmware updates, and network diagnostics.

L&T HMI PanelsL&T Operator InterfacesL&T Touchscreen Units

L&T Process Automation and Field Transmitters

L&T temperature, pressure, and flow transmitters monitor critical processes in oil & gas, pharmaceuticals, and utilities. Failures include sensor drift, 4-20mA signal loss, connector corrosion, and electronics module degradation in harsh Indian industrial environments.

L&T Temperature TransmittersL&T Pressure TransmittersL&T Flow Measurement UnitsL&T Signal Conditioners

L&T Motor Protection and Control Relays

L&T motor protection relays prevent equipment damage from overload, phase loss, and earth faults common in Indian power infrastructure. Faults include relay coil burnout, thermal element aging, and tripping threshold drift.

L&T Thermal Overload RelaysL&T Electronic Motor ProtectorsL&T Protective Relays
Why Us

Why Choose Synchronics for LARSEN & TOUBRO Repairs?

🔬

PCB-Level Expertise

We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on LARSEN & TOUBRO equipment.

⚡

Fast Turnaround

Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.

🛡️

6-Month Warranty

Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.

📦

All-India Service

Couriered repairs accepted from any city in India — Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.

Diagnosis

Common LARSEN & TOUBRO Equipment Faults We Fix

Based on 30+ years of repair data, these are the most frequent failure modes we see in LARSEN & TOUBRO equipment arriving at our workshop.

  • ✓Soft starter thyristor short circuit failure — L&T soft starters fail when power surges from Indian grid instability or poor power factor correction cause thyristor junctions to break down. This is especially common in textile mills and foundries near weaker feeders.
  • ✓L&T contactor coil winding open circuit — L&T distribution panel contactors suffer coil failure due to high humidity, thermal cycling in industrial ovens, and electrical stress from frequent switching. Common in automotive and food processing facilities across India.
  • ✓PLC analog input module reading drift and offset error — L&T analog modules accumulate measurement error over 3-5 years due to capacitor aging, op-amp drift, and thermal changes in uncontrolled Indian factory environments. This causes control loops to malfunction and product quality loss.
  • ✓HMI touchscreen complete unresponsiveness or intermittent touch detection — L&T HMI touchscreens fail from humidity ingress, vibration damage to flex connectors in heavy machinery areas, and LCD controller IC failures common in chemical and pharmaceutical plants near corrosive environments.
  • ✓Motor protection relay nuisance tripping and erratic behavior — L&T thermal relays trip incorrectly due to ambient temperature changes, coil insulation degradation, and mechanical movement of bimetallic elements in vibrating Indian machinery. Phase loss relays fail when power factor correction capacitors disconnect unexpectedly.
  • ✓L&T drive communication card Ethernet or serial port failure — L&T AC drive communication modules fail when industrial automation networks experience ground loops, lightning strikes, or incorrect shielding in Indian plants lacking proper EMC infrastructure. Firmware corruption also occurs during grid surges.
Process

How We Repair Your LARSEN & TOUBRO Unit

📥
Step 1

Receive & Log

Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.

🔬
Step 2

Fault Diagnosis

Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.

🔧
Step 3

Component Repair

Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.

✅
Step 4

Full-Load Test

Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.

Sectors

Industries Using LARSEN & TOUBRO Equipment

We serve plant maintenance teams across all major industries where LARSEN & TOUBRO automation is deployed.

Steel and Iron ManufacturingTextile and Spinning MillsOil and Gas RefiningAutomotive ManufacturingPharmaceutical and Chemical ProcessingPower Generation and DistributionFood and Beverage ProcessingHeavy Equipment and Foundries
FAQ

Frequently Asked Questions — LARSEN & TOUBRO Repairs

Is Synchronics an authorised LARSEN & TOUBRO service centre?+

No. Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider. We are not affiliated with, authorised by, sponsored by or endorsed by LARSEN & TOUBRO or its group companies, and we are not an official LARSEN & TOUBRO service centre, dealer or representative. Brand names and model numbers are used only to identify the equipment we repair. If your equipment is under manufacturer warranty or a service contract, please contact the manufacturer first — third-party repair may affect that cover.

Do you repair Larsen & Toubro equipment anywhere in India?+

Yes. Synchronics repairs the full Larsen & Toubro product catalog — 39+ product lines including soft starters, AC drives, PLCs, HMIs, distribution panels, motor protection relays, and process transmitters.

What is the typical repair turnaround for L&T soft starters and AC drives?+

L&T soft starter and AC drive repairs typically take 5-7 working days depending on fault severity. Synchronics keeps common replacement modules (thyristors, control cards, heat sinks, fans) in stock. We also provide loaner units during repair at no extra cost for Indian manufacturing facilities with tight downtime constraints.

Can Synchronics repair L&T PLC modules and reprogram logic controllers?+

Absolutely. Synchronics repairs 39+ L&T PLC modules and automation controllers. If you have backup files, we reload your exact program. If backups are unavailable, we restore logic from program dumps or reverse-engineer the control sequence. All testing is done on our L&T test bench with simulated I/O signals.

What warranty does Synchronics provide on L&T equipment repairs?+

We provide 12 months of warranty on all parts replaced and labor. If the same fault recurs due to our repair, we fix it at no charge. For complex systems like integrated L&T distribution panels and drive systems, we include a 30-day on-site performance guarantee. We also provide technical support documentation and troubleshooting guidance during the warranty period for Indian plant engineers.

Does Synchronics repair L&T HMI touchscreens and operator interface panels?+

Yes. Synchronics repairs L&T HMI panels, touchscreen displays, and operator interfaces. We can also reprogram custom screens if you provide specifications. Turnaround is typically 4-6 days, and we test all displays under actual plant network conditions before dispatch.

How do I send my LARSEN & TOUBRO unit for repair?+

Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt.

What is the cost of repairing a LARSEN & TOUBRO drive or PLC?+

Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.

What warranty do you provide on LARSEN & TOUBRO repairs?+

All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.

Do you provide a no-fix, no-fee guarantee?+

Yes. For standard units, evaluation is free and included in the repair cost — if we cannot repair your LARSEN & TOUBRO unit, no repair charge is raised. A physical inspection charge applies only if the unit has already been subjected to a third-party repair attempt, and we tell you before we start.

LARSEN & TOUBRO Repair Catalog

Showing 1–24 of 40 LARSEN & TOUBRO products

32+
Years in Business
80,000+
Units Repaired
150+
Workstations
4.8★
682 Reviews

Disclaimer

LARSEN & TOUBRO and all associated product names and model numbers are trademarks of their respective owner(s). Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider and is not affiliated with, authorised by, sponsored by or endorsed by LARSEN & TOUBRO. Product names and model numbers are used solely to identify the equipment on which repair services are offered, and no trademark ownership is claimed or implied.

Trusted Since 1994 · ISO Certified · 32+ Years

Get Your Equipment
Back in Action — Fast

Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.

✓

Free Evaluation

No obligation

⚡

48hr Turnaround

Fastest in India

🛡

6-Month Warranty

Every repair

₹

No Fix, No Charge

Zero risk policy

📦

Pan-India Service

Ship from anywhere