MLS Lanny Repair Services India
MLS Lanny is an Italian manufacturer specialising in advanced motion control systems, servo drives, and industrial automation equipment. Founded in 1982, the company has built a reputation for high-precision stepper motor drivers, stepper and servo motor controllers, and integrated motion control solutions serving OEMs and integrators across Europe, Asia, and India. MLS Lanny equipment is widely deployed in Indian textile machinery, packaging lines, and precision manufacturing sectors.
MLS Lanny is an Italian manufacturer specialising in advanced motion control systems, servo drives, and industrial automation equipment. Founded in 1982, the company has built a reputation for high-precision stepper motor drivers, stepper and servo motor controllers, and integrated motion control solutions serving OEMs and integrators across Europe, Asia, and India. MLS Lanny equipment is widely deployed in Indian textile machinery, packaging lines, and precision manufacturing sectors.
Synchronics Electronics has deep expertise repairing MLS Lanny servo drives, stepper motor controllers, motion control modules, programmable logic interfaces, and specialist stepper/servo hybrid systems. Our 180+ engineers include MLS Lanny-certified technicians with access to factory schematics, firmware, and calibration data. We repair all five MLS Lanny product families in our catalog and deliver faster turnaround than overseas logistics, with on-site diagnostics available across India.
MLS Lanny servo drive and stepper motor controller experts across India.
MLS Lanny Equipment We Repair — By Category
MLS Lanny Product Lines We Repair
Our engineers are trained on the full MLS Lanny product range. Below are the major product families we service.
MLS Lanny Stepper Motor Drivers
Compact microstepping drivers for NEMA and IEC stepper motors. Common faults include phase winding failures, encoder signal loss, and thermal runaway. Repair involves driver stage diagnostics, coil winding testing, and firmware reflashing.
MLS Lanny Servo Motion Controllers
Closed-loop servo control units with integrated PID algorithms and real-time feedback processing. Frequently encounter velocity ripple issues, encoder misalignment, and EEPROM corruption after power surges.
MLS Lanny Integrated Drive Modules
All-in-one motion control cards combining stepper/servo interface, I/O conditioning, and communication modules. Repair focuses on switching power supply failures, gate driver faults, and CAN/Ethernet port damage.
MLS Lanny Stepping Hybrid Controllers
Hybrid stepper-servo systems offering smooth low-speed torque with high-speed servo efficiency. Common issues: phase detection sensor failure, commutation timing errors, and microstepping resolution drift.
MLS Lanny Motion Interface Modules
Industrial communication and conditioning modules for RS-232, RS-485, CANopen, and Modbus RTU. Frequent failures: isolated power supply burnout, optocoupler degradation, and firmware version incompatibility.
Why Choose Synchronics for MLS Lanny Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on MLS Lanny equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India. Doorstep pickup available in Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common MLS Lanny Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in MLS Lanny equipment arriving at our workshop.
- ✓Stepper driver phase winding short circuit — MLS Lanny stepper drivers experience phase winding failures due to overvoltage transients on motor leads, inadequate decoupling capacitors, or extended operation above rated current. Indian textile machinery often runs in dusty environments accelerating insulation breakdown.
- ✓Servo encoder signal dropout and feedback loss — MLS Lanny servo controllers lose encoder feedback due to loose motor connectors, corroded encoder cable shields in humid plants, or defective encoder interface circuitry. Indian packaging machinery experiences frequent EMI from nearby welding and induction heating.
- ✓Microstepping resolution drift and position error — MLS Lanny stepper drivers accumulate microstepping errors when DAC reference voltages drift due to component aging, thermal stress, or EEPROM corruption. Indian printing and embroidery machines demand extreme precision over 8+ hour shifts.
- ✓CAN/RS-485 communication interface failure — MLS Lanny motion interface modules fail communication due to ESD damage on connector pins, incorrect termination resistor installation, or isolated power supply collapse. Industrial plants with legacy cabling often have impedance mismatches.
- ✓Integrated drive module MOSFET gate driver failure — MLS Lanny IDM cards experience gate driver IC burnout from sustained shoot-through conditions, inadequate heat sinking, or moisture ingress in gate drive transformers. Indian machine shops with poor ventilation accelerate component degradation.
- ✓Hybrid stepper-servo commutation timing error — MLS Lanny HSC controllers lose commutation accuracy when phase detection sensors become misaligned, Hall effect sensors degrade, or firmware commutation tables become corrupted. Extended runtime without calibration compounds the issue.
How We Repair Your MLS Lanny Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using MLS Lanny Equipment
We serve plant maintenance teams across all major industries where MLS Lanny automation is deployed.
Frequently Asked Questions — MLS Lanny Repairs
Do you repair MLS Lanny equipment anywhere in India?+
Yes. Synchronics repairs the full MLS Lanny product range - stepper drivers, servo controllers, motion interface modules, hybrid systems, and integrated drive modules. We offer pan-India door pickup from Mumbai, Delhi, Pune, Chennai, Hyderabad, Ahmedabad, Surat, Nagpur, and all major industrial cities. All repairs processed in our Vadodara, Gujarat facility with 5-7 day typical turnaround.
What is the typical repair cost for MLS Lanny servo drive failures?+
MLS Lanny servo drive repairs typically range from INR 8,000 to 22,000 depending on fault severity. Encoder signal losses and power supply issues are at the lower end; phase winding shorts and gate driver replacements are higher. Synchronics provides free diagnostics and written quotation before repair. We offer 12-month warranty on all component replacements.
Can Synchronics repair MLS Lanny stepper drivers with microstepping issues?+
Absolutely. Microstepping resolution drift is one of the most common MLS Lanny stepper driver faults we repair. We recalibrate DAC reference voltages, reprogram EEPROM with factory firmware, and perform extended thermal cycling to ensure stability. Most textile machinery achieves <0.1 microstep position error post-repair. Typical turnaround is 4-5 days.
Do you have original MLS Lanny spare parts in stock?+
We stock high-demand MLS Lanny components including phase output MOSFETs, gate driver ICs, optocouplers, and encoder signal conditioning modules. For less common parts, we source directly from MLS Lanny Italy with 10-14 day lead time. We also offer reverse-engineered equivalents from industrial component partners to minimize downtime if original parts are unavailable.
What warranty does Synchronics provide on MLS Lanny repairs?+
All MLS Lanny repairs include a 12-month parts and labour warranty covering the repaired fault. If a related component fails within warranty, we repair it at no charge. For mission-critical equipment, we offer extended 24-month warranty and same-day dispatch of loaner units during repair.
How do I send my MLS Lanny unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt. Doorstep pickup is available in Vadodara, Ahmedabad, Surat, Mumbai, and Pune.
What is the cost of repairing a MLS Lanny drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on MLS Lanny repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your MLS Lanny unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
MLS Lanny Repair Catalog
Showing 1–5 of 5 MLS Lanny products
Other Brands We Repair in the Same Categories
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Pickup
Doorstep service