NEUTRONICS Repair Services India
Neutronics is a specialized manufacturer of neutron detection systems, radiation monitoring equipment, and nuclear instrumentation used in research, medical, industrial, and defense applications. The company has built a global reputation for precision sensors and counting electronics that operate in demanding nuclear and high-radiation environments. Neutronics equipment is deployed across Indian nuclear facilities, research institutions, and industrial sterilization plants.
Neutronics is a specialized manufacturer of neutron detection systems, radiation monitoring equipment, and nuclear instrumentation used in research, medical, industrial, and defense applications. The company has built a global reputation for precision sensors and counting electronics that operate in demanding nuclear and high-radiation environments. Neutronics equipment is deployed across Indian nuclear facilities, research institutions, and industrial sterilization plants.
Synchronics repairs Neutronics radiation detectors, counting electronics, neutron probes, and associated instrumentation across all major Indian industrial sectors. Our 180+ engineers have deep expertise in nuclear-grade electronics repair, handling sensitive detector systems and their specialized amplifier/discriminator circuits. We understand the critical calibration and compliance requirements for Neutronics equipment in India's regulated nuclear and medical industries, delivering precision repair with full traceability documentation.
Expert repair of Neutronics nuclear instrumentation and radiation monitoring electronics across India.
NEUTRONICS Equipment We Repair — By Category
NEUTRONICS Product Lines We Repair
Our engineers are trained on the full NEUTRONICS product range. Below are the major product families we service.
Neutron Detection Systems
Helium-3 and BF3 neutron detectors with associated preamplifiers and discriminator electronics. Common failures include gas tube degradation, high voltage supply faults, and signal conditioning circuit breakdown from electromagnetic interference in industrial environments.
Radiation Monitoring Instrumentation
Portable and fixed gamma-ray spectrometers, dose rate meters, and radiation survey instruments. Repairs address detector window degradation, photomultiplier tube failures, high-voltage power supply instability, and analog-to-digital conversion errors.
Counting Electronics and Amplifiers
Precision preamplifiers, main amplifiers, and counting/timing modules for low-level radiation measurement. Typical issues include noise pickup in analog front-end stages, timing pulse distortion, and baseline drift in long-term monitoring applications.
Data Acquisition and Control Systems
Multichannel analyzer cards, pulse height analyzers, and data logging interfaces for radiation spectroscopy systems. Repair challenges include analog-to-digital converter calibration loss, timing jitter compensation, and firmware corruption in embedded controllers.
High-Voltage Power Supply Modules
Stabilized HV supplies (500V to 3000V) powering photomultiplier tubes and gas detectors in radiation instrumentation. Common faults include capacitor aging, regulator feedback circuit failure, transformer issues, and overcurrent protection latch-ups under detector leakage conditions.
Why Choose Synchronics for NEUTRONICS Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on NEUTRONICS equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India — Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common NEUTRONICS Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in NEUTRONICS equipment arriving at our workshop.
- ✓Photomultiplier tube signal loss and noise floor rise — PMT aging, gas contamination inside tube envelope, or cathode surface degradation. Neutronics detectors operating continuously in Indian nuclear facilities experience accelerated PMT wear due to high ambient temperature fluctuations. High-voltage stress and operational decades accelerate this failure mode.
- ✓High-voltage supply regulation failure and output voltage drift — Electrolytic capacitor degradation in feedback divider networks, voltage regulator IC failure, or transformer primary-secondary insulation breakdown. Neutronics HV supplies in humid Indian industrial environments suffer accelerated capacitor aging, causing output drift of 50-200V during warm-up or load changes.
- ✓Preamplifier output instability and baseline wander — Coupling capacitor leakage in signal path, operational amplifier bias current drift, or input stage oscillation due to loading effects. Neutronics preamplifiers used in long-term gamma spectroscopy on Indian research reactor installations exhibit baseline drift of 10-100mV over 24-hour periods when coupling capacitors age.
- ✓Counting circuit pulse pile-up and dead-time correction error — Main amplifier clipping, timing pickoff circuit malfunction, or firmware dead-time calculator corruption. Neutronics counter modules in Indian sterilization facilities processing high count-rate sources (>10^5 cps) lose accuracy when amplifier gain drifts or timing thresholds shift, causing 2-5 percent count-rate loss.
- ✓Analog-to-digital converter linearity loss and spectral peak broadening — ADC capacitor aging causing charge redistribution errors, voltage reference drift, or differential non-linearity from noise coupling into ADC input stage. Neutronics MCA modules used in Indian research laboratories exhibit 2-3 percent peak broadening (FWHM degradation) when ADC performance degrades, affecting isotope identification precision.
- ✓Detector gas leakage and reduced ionization efficiency — Failure of hermetic seal in BF3 or He-3 gas-filled tubes due to vibration, thermal cycling, or manufacturing defect. Neutronics detectors in Indian accelerator facilities and industrial neutron sources experience seal degradation from temperature swings exceeding 30 degrees C, causing gas loss of 1-5 percent annually.
How We Repair Your NEUTRONICS Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using NEUTRONICS Equipment
We serve plant maintenance teams across all major industries where NEUTRONICS automation is deployed.
Frequently Asked Questions — NEUTRONICS Repairs
Do you repair Neutronics equipment anywhere in India?+
Yes. Synchronics repairs the complete Neutronics nuclear instrumentation product line — neutron detectors, gamma spectrometers, counting electronics, HV supplies, and data acquisition systems. We offer PAN India door pickup service from Mumbai, Delhi, Pune, Bangalore, Chennai, Hyderabad, Ahmedabad, Kolkata, and all major cities, with centralized repair facility in Vadodara, Gujarat. Turnaround time is typically 5-7 working days for standard repairs.
What calibration and traceability documentation do you provide for Neutronics repairs?+
Synchronics provides full calibration certificates traceable to BARC (Bhabha Atomic Research Centre) national standards or ISO 17025 accredited external labs for all Neutronics nuclear instrumentation repairs. Each detector or counting system is characterized with energy calibration curves, efficiency tables, and temperature coefficient data. Documentation includes pre-repair and post-repair test plots, component replacement logs, and compliance statements for Indian nuclear facility requirements.
Why do Neutronics detectors fail prematurely in Indian industrial environments?+
Indian sterilization plants, accelerator facilities, and research laboratories operate Neutronics equipment in challenging conditions — high ambient temperatures (35-45°C), humidity swings, electromagnetic interference from industrial machinery, and continuous 24x7 operation. These stressors accelerate photomultiplier tube aging, electrolytic capacitor degradation, and seal deterioration in gas-filled detectors. Synchronics addresses these Indian-specific failure modes through component selection, environmental hardening, and preventive maintenance protocols.
Can you repair Neutronics equipment to nuclear industry compliance standards?+
Yes. Synchronics engineers are trained in nuclear facility compliance requirements including regulatory oversight by the Atomic Energy Regulatory Board (AERB). All Neutronics repairs include documentation, traceability, testing protocols, and verification to applicable Indian nuclear industry standards. We maintain repair records and component qualification databases to support periodic facility audits and safety reviews.
What is the typical cost and lead time for Neutronics detector repair?+
Neutronics detector repair costs range from INR 8,000-25,000 depending on fault severity — simple electronics troubleshooting (8-12K), preamplifier recalibration (12-18K), or complete detector/PMT replacement (20-35K). Standard lead time is 5-7 working days from receipt. We offer expedited 48-hour repair for critical production downtime situations. All quotes include parts, labor, calibration, and return shipping via registered courier.
How do I send my NEUTRONICS unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt.
What is the cost of repairing a NEUTRONICS drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on NEUTRONICS repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. If we cannot repair your NEUTRONICS unit after diagnosis, you pay only the diagnosis fee (₹500–₹1,500 depending on the product). The unit is returned to you at no additional charge.
NEUTRONICS Repair Catalog
Showing 1–1 of 1 NEUTRONICS products
Other Brands We Repair in the Same Categories
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Service
Ship from anywhere