TECHKON Repair Services India
TECHKON is a German manufacturer of advanced optical inspection and quality control systems, renowned for precision measurement technology in print, packaging, and industrial production. Their systems are deployed across global manufacturing facilities, including significant installations in Indian printing, packaging, and pharmaceutical sectors where quality assurance is critical to compliance and export standards.
TECHKON is a German manufacturer of advanced optical inspection and quality control systems, renowned for precision measurement technology in print, packaging, and industrial production. Their systems are deployed across global manufacturing facilities, including significant installations in Indian printing, packaging, and pharmaceutical sectors where quality assurance is critical to compliance and export standards.
Synchronics specializes in repairing TECHKON SpectralMatch, SpectralProof, and SpectraView colour measurement and verification systems. Our 180+ engineers have hands-on experience with TECHKON's optical sensors, spectrophotometers, and colour management electronics. Indian manufacturers trust Synchronics for rapid TECHKON repairs that minimize production downtime and maintain colour consistency standards.
Expert repair of TECHKON optical inspection systems across Indian manufacturing.
TECHKON Equipment We Repair — By Category
TECHKON Product Lines We Repair
Our engineers are trained on the full TECHKON product range. Below are the major product families we service.
SpectralMatch Series
SpectralProof Series
Dedicated soft-proofing and colour proofing system for packaging and label printing.
SpectraView System
Advanced multi-spectral colour analysis and verification platform used in pharmaceutical packaging and food labelling. Typical faults include optical filter contamination, photodiode array failure, and data acquisition module electronics breakdown.
Spectral Sensor Modules
Standalone optical sensors and spectrophotometric probes for integration into production lines. Common issues are sensor connector corrosion, reference standard degradation, and analogue-to-digital conversion circuit failure.
TECHKON Control Electronics
Proprietary control boards and interface modules managing sensor data, colour calculations, and output interfaces. Repairs involve relay failures, capacitor aging, USB port damage, and firmware corruption.
Why Choose Synchronics for TECHKON Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on TECHKON equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India — Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common TECHKON Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in TECHKON equipment arriving at our workshop.
- ✓CCD/CMOS sensor optical signal degradation — TECHKON optical sensors degrade over 5-7 years of continuous operation due to thermal stress, light exposure, and dust accumulation on sensor windows. LED illumination also dims, reducing signal-to-noise ratio and causing measurement errors.
- ✓Software corruption or incorrect profile loading also causes colour values to shift unpredictably.
- ✓LED illumination module failure — TECHKON uses multi-wavelength LED arrays (D65, UV, IR) that fail due to solder joint fatigue, thermal cycling in Indian industrial environments, or power supply regulation failure. LED driver ICs can also degrade.
- ✓Software license and communication errors — TECHKON colour management software fails to authenticate when license server connection is lost, network adapters malfunction, or control electronics USB ports are damaged. Firmware bugs also cause software crashes during measurement cycles.
- ✓Analogue-to-digital conversion noise and quantization errors — TECHKON's ADC circuits suffer from aging electrolytic capacitors causing power supply ripple, ground plane separation issues, and op-amp gain degradation. EMI from nearby machinery in Indian factories also introduces measurement noise.
- ✓Photodiode array responsivity loss and dark current rise — TECHKON multi-element photodiode arrays in SpectraView systems lose sensitivity when exposed to thermal shock, moisture ingress, or component aging. Dark current (noise floor) increases, reducing dynamic range and colour discrimination accuracy.
How We Repair Your TECHKON Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using TECHKON Equipment
We serve plant maintenance teams across all major industries where TECHKON automation is deployed.
Frequently Asked Questions — TECHKON Repairs
Is Synchronics an authorised TECHKON service centre?+
No. Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider. We are not affiliated with, authorised by, sponsored by or endorsed by TECHKON or its group companies, and we are not an official TECHKON service centre, dealer or representative. Brand names and model numbers are used only to identify the equipment we repair. If your equipment is under manufacturer warranty or a service contract, please contact the manufacturer first — third-party repair may affect that cover.
Do you repair TECHKON equipment anywhere in India?+
Yes. Synchronics repairs the complete TECHKON product range - SpectralMatch, SpectralProof, SpectraView systems, and all optical sensor modules. We serve clients in Mumbai, Delhi, Bangalore, Chennai, Hyderabad, Ahmedabad, Pune, and all other Indian cities with same-day logistics coordination.
What is the typical turnaround time for TECHKON colour measurement system repair?+
Sensor cleaning and software issues may resolve within 2-3 days. Synchronics provides daily progress updates and express turnaround for critical production scenarios.
What happens when TECHKON sensor modules are no longer available from the manufacturer?+
We also repair and refurbish end-of-life optical components using precision techniques.
Do you offer preventive maintenance contracts for TECHKON colour measurement systems?+
Yes. This minimizes unexpected failures and ensures consistent colour measurement accuracy for Indian manufacturers maintaining export quality standards.
How do I send my TECHKON unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt.
What is the cost of repairing a TECHKON drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on TECHKON repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. For standard units, evaluation is free and included in the repair cost — if we cannot repair your TECHKON unit, no repair charge is raised. A physical inspection charge applies only if the unit has already been subjected to a third-party repair attempt, and we tell you before we start.
TECHKON Repair Catalog
Showing 1–1 of 1 TECHKON products
Disclaimer
TECHKON and all associated product names and model numbers are trademarks of their respective owner(s). Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider and is not affiliated with, authorised by, sponsored by or endorsed by TECHKON. Product names and model numbers are used solely to identify the equipment on which repair services are offered, and no trademark ownership is claimed or implied.
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Service
Ship from anywhere