TERASAKI Repair Services India
Terasaki Electric Co., Ltd. is a Japanese multinational specialising in low-voltage and medium-voltage switchgear, distribution boards, and power management systems. Founded in 1925, Terasaki has established a strong presence across Asian industrial sectors, supplying critical infrastructure to manufacturing, utilities, and process industries. In India, Terasaki equipment is widely deployed in textile mills, steel plants, chemical processing facilities, and power distribution networks.
Terasaki Electric Co., Ltd. is a Japanese multinational specialising in low-voltage and medium-voltage switchgear, distribution boards, and power management systems. Founded in 1925, Terasaki has established a strong presence across Asian industrial sectors, supplying critical infrastructure to manufacturing, utilities, and process industries. In India, Terasaki equipment is widely deployed in textile mills, steel plants, chemical processing facilities, and power distribution networks.
Synchronics Electronics has extensive experience servicing Terasaki switchgear, distribution panels, and electrical control systems across Indian industrial plants. Our 180+ engineers understand Terasaki's robust yet complex architectures, from compact MCCs (Motor Control Centres) to large industrial load break switches and automatic power factor correction systems. We diagnose and repair Terasaki equipment on-site and at our Vadodara facility, ensuring minimal downtime for critical operations.
Terasaki switchgear and distribution system experts serving Indian industry since 1994.
TERASAKI Equipment We Repair — By Category
TERASAKI Product Lines We Repair
Our engineers are trained on the full TERASAKI product range. Below are the major product families we service.
TERASAKI MCCs (Motor Control Centres)
Compact and industrial motor control centres with integrated soft-starters, VFD interfaces, and protection relays.
TERASAKI Low Voltage Switchboards
Panel-mounted switchboards for industrial distribution with incoming isolators, feeder starters, and metering. Typical faults include earthing system degradation, cable gland seal failure leading to moisture ingress, and busbar corrosion in humid mill environments.
TERASAKI Load Break Switches (LBS)
Medium-voltage load break switches rated up to 33kV, used in feeder isolation and distribution loops. Repairs address contact erosion, spring mechanism fatigue, and operating coil burn-out due to surge transients in old installations.
TERASAKI Power Factor Correction Units
Capacitor banks and automatic APFC controllers for industrial reactive power management. Common failures include capacitor element rupture, thyristor bridge degradation in step-control units, and PLC firmware corruption in digitally-switched systems.
TERASAKI VFD Panels & Soft-Starter Assemblies
Pre-configured starter and drive enclosures integrating Terasaki distribution architecture with variable frequency and soft-start control.
TERASAKI Automatic Transfer Switch (ATS) Units
Static and electromechanical ATS for seamless generator/mains switchover in standby power systems. Faults involve sensing transformer saturation, relay contact lag, and synchronisation logic failure under load-sharing modes.
Why Choose Synchronics for TERASAKI Repairs?
PCB-Level Expertise
We repair down to the component level — not just swap boards. Our engineers identify root causes, replace failed IGBTs, capacitors, processors, and gate drivers on TERASAKI equipment.
Fast Turnaround
Standard 7–10 working days. Express 3–5 days available for critical breakdowns. Emergency same-day/next-day service for unplanned downtime.
6-Month Warranty
Every repaired unit ships with a 6-month comprehensive warranty on parts and labour. Our repair success rate is over 94% across all brands.
All-India Service
Couriered repairs accepted from any city in India — Vadodara, Mumbai, Pune, Ahmedabad, Surat, Chennai, and more.
Common TERASAKI Equipment Faults We Fix
Based on 30+ years of repair data, these are the most frequent failure modes we see in TERASAKI equipment arriving at our workshop.
- ✓Contactor coil open-circuit or short-circuit failure — Terasaki AC contactors operate in high-vibration mill and plant environments. Continuous thermal cycling, moisture ingress into coil windings, and transient surges from motor inrush currents degrade insulation over 5-8 years of operation.
- ✓Load-sharing in multi-motor circuits masks actual motor currents, confusing relay sensing.
- ✓Busbar connection loose or corroded, causing high resistance joints — In coastal and humid Indian regions (textile mills near Coimbatore, chemical plants in Gujarat), salt spray and moisture accelerate copper-to-copper joint oxidation. Terasaki switchboards using bolted joints experience creep-induced loosening under thermal cycling.
- ✓Capacitor bank element rupture in APFC units — Terasaki power factor correction capacitors are subject to harmonic distortion from non-linear loads (VFDs, welders). Over-voltage due to inadequate fuses or weak power supply regulation causes dielectric stress and catastrophic failure, especially in outdated film capacitors.
- ✓Load break switch (LBS) contact erosion and arcing on open — Terasaki medium-voltage LBS equipment handles inductive loads (transformer and motor feeder circuits) that produce high-voltage transients on switching. Contact material gradually erodes, leading to slower arc collapse and increased median switch-off time.
- ✓ATS synchronisation lag or failure during load-sharing — In standby power configurations, Terasaki ATS units rely on phase-lock detection. Voltage transients, generator transient dip, and aging sensing transformer cores introduce phase delay, preventing clean bumpless switchover or causing load-sharing loop instability.
How We Repair Your TERASAKI Unit
Receive & Log
Your unit is logged into our tracking system with a unique job number. You receive WhatsApp / email updates at every stage.
Fault Diagnosis
Board-level diagnosis using oscilloscopes, LCR meters, and thermal cameras. Root cause identified before any repair begins.
Component Repair
Faulty ICs, capacitors, MOSFETs, IGBTs, and gate drivers replaced with genuine or equivalent-spec components.
Full-Load Test
Unit tested under rated load with original or equivalent motor. All parameters verified. 6-month warranty issued.
Industries Using TERASAKI Equipment
We serve plant maintenance teams across all major industries where TERASAKI automation is deployed.
Frequently Asked Questions — TERASAKI Repairs
Is Synchronics an authorised TERASAKI service centre?+
No. Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider. We are not affiliated with, authorised by, sponsored by or endorsed by TERASAKI or its group companies, and we are not an official TERASAKI service centre, dealer or representative. Brand names and model numbers are used only to identify the equipment we repair. If your equipment is under manufacturer warranty or a service contract, please contact the manufacturer first — third-party repair may affect that cover.
Do you repair Terasaki equipment anywhere in India?+
Yes. Synchronics repairs the full Terasaki product range — switchboards, MCCs, load break switches, APFC units, soft-starters, and ATS equipment. Equipment is serviced at our state-of-the-art facility in Vadodara, Gujarat, with turnaround times as low as 3-5 working days.
What is your experience with Terasaki MCC and soft-starter panel repairs?+
Synchronics has repaired 500+ Terasaki MCCs and soft-starter enclosures across Indian textile mills, steel plants, and automotive facilities since 1994. Our engineers understand Terasaki's architecture deeply and carry genuine spares inventory to minimise plant downtime. We also upgrade legacy bimetallic relay systems to modern digital overload protection.
How do you diagnose Terasaki load break switch (LBS) failures?+
Synchronics uses contact resistance measurement, vacuum integrity testing, and spring force verification to diagnose Terasaki LBS faults. We inspect contacts under magnification for erosion, check operating mechanism smoothness, and measure closing/opening speed with mechanical timers. Contact packs are replaced if wear exceeds design limits. We also install surge arrestors on feeders to reduce future transient damage and generate detailed test reports.
What is the typical repair cost and lead time for Terasaki switchgear?+
Repair costs vary: simple contactor/relay replacement costs Rs. 2,000-4,000; capacitor bank refurbishment Rs. 5,000-15,000; load break switch contact replacement Rs. 8,000-20,000; ATS controller reprogramming Rs. 6,000-12,000. Lead time is typically 3-7 working days depending on parts availability and extent of damage. Warranty on repairs is 12 months.
How do I send my TERASAKI unit for repair?+
Pack the unit securely and courier it to our Vadodara workshop. Include a note with the fault description and your contact details. We will log it into our system and WhatsApp you a job number within 24 hours of receipt.
What is the cost of repairing a TERASAKI drive or PLC?+
Repair cost depends on the model and the fault. We offer a free diagnosis — once we identify the fault, we provide a fixed quotation before proceeding. Typical repairs cost 20–40% of the new unit price. We will never repair without your approval.
What warranty do you provide on TERASAKI repairs?+
All repaired units carry a 6-month comprehensive warranty covering the same fault and related issues. If the fault recurs within the warranty period, we repair it free of cost.
Do you provide a no-fix, no-fee guarantee?+
Yes. For standard units, evaluation is free and included in the repair cost — if we cannot repair your TERASAKI unit, no repair charge is raised. A physical inspection charge applies only if the unit has already been subjected to a third-party repair attempt, and we tell you before we start.
Other Brands We Repair in the Same Categories
Disclaimer
TERASAKI and all associated product names and model numbers are trademarks of their respective owner(s). Synchronics Electronics Pvt. Ltd. is an independent third-party repair provider and is not affiliated with, authorised by, sponsored by or endorsed by TERASAKI. Product names and model numbers are used solely to identify the equipment on which repair services are offered, and no trademark ownership is claimed or implied.
Get Your Equipment
Back in Action — Fast
Send us your faulty industrial electronics. Our engineers will diagnose it and provide a detailed quote within 24 hours — with no obligation to proceed.
Free Evaluation
No obligation
48hr Turnaround
Fastest in India
6-Month Warranty
Every repair
No Fix, No Charge
Zero risk policy
Pan-India Service
Ship from anywhere

